Loading ...
Loading ...
Loading ...
10
3.3 Unpacking
Remove the device out of the carton, remove the packaging material, shovel and measuring
container.
3.4 Disposal of the packaging
Caso believes in the importance of recycling and has selected packaging materials
that not only protect your unit from damage during transit, but can be recycled to
minimize any ecological impact. Recycling the packaging materials preserves raw
materials and reduces waste. Take any packaging materials that are no longer
required to a recycling collection point for proper disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event of a
guarantee claim.
3.4.1 Setup location requirements
In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:
• Place the device on a firm, flat, level and heat-resistant surface with sufficient load-bearing
capacity for the device and its contents.
• Dot not place the device on a metal surface.
• Choose the setup location in such a way that children cannot reach any hot surfaces on the
device.
• The device is not intended to be installed in a wall or a built-in cupboard.
• Do not set up the device in a hot, wet or extremely damp environment or near flammable
material.
• Do not place the device near a gas or electric cooker or an oven.
• The device requires an adequate flow of air in order to operate correctly.Place the device
with the backside against a wall (with 4” distance). Keep 8” free space at the other sides of
the device.
• Do not cover up any openings on the device and do not block these off.
• The electrical socket must be easily accessible so that the power lead can be disconnected
easily, in the case of an emergency.
• The device and power cord should not come in contact with hot surfaces. The device could
be damaged.
• The installation and assembly of this device in non-stationary setup locations must be
carried out by specialist companies / electricians, provided they guarantee the prerequisites
for the safe use of this device.
Loading ...
Loading ...
Loading ...