Loading ...
Loading ...
Loading ...
Cassida C300 Coin Counter/Sorter/Wrapper
Moving money forward
10
The C300 always operates in a batching mode by default. To enable simple counting, all batch
quantities need to be set to zero. To set batch quantities to zero, press and hold the “-” button
for approximately three seconds until “C” is displayed on the top left corner of the LCD display.
• Before loading the hopper, make sure there are no uncounted coins remaining in it from the
previous count.
• To count coins, place them into the hopper and press the “START/STOP” button.
• The C300 will start counting and will automatically sort all coins into the appropriate coin
trays or tubes.
• The machine will automatically stop when all coins in the hopper are counted or if the batch
quantity for any coin denomination is reached.
• To stop the machine, press the “START/STOP” button.
2.1 Powering Up
GETTING STARTED
2.
IMPORTANT: Before turning on the Cassida C300, make certain no coins are present in the
coin hopper, otherwise this will cause an “EA” error when the C300 self-test is performed.
To clear the “EA” error, press the “START/STOP” button, then empty any coins present in
the coin trays.
Plug the power cord attached to the C300 into a three-prong outlet. Turn on the power
switch located on the rear of the unit. The machine will conduct a self-check. The main
display will show the report screen when the test has been successfully completed.
2.2 Counting
2.3 Adding
• To resume counting, press the "START/STOP" button.
• When a coin tray becomes full, stop the machine and empty the tray to ensure correct machine
operation. Stopping the machine will not alter or reset the count. You can continue counting by
pressing the "START/STOP" button.
• As it counts, the Cassida C300 will automatically display the total value of counted coins and
the breakdown by denomination on the screen.
• To reset the coin count before starting a new batch, press the “CLEAR” button.
The C300 operates in ADD mode by default. In ADD mode, the coin count is added to the count from
previous batches. To start a new count, press the "CLEAR" button. This will reset the coin count to zero.
11
Loading ...
Loading ...
Loading ...