Loading ...
Loading ...
Loading ...
• 09 • • 10 •
NOTES:
1. While in the faucet mode, DO NOT disconnect the faucet. Otherwise, the wash cycle
cannot be completed.
2. A red flashing water shortage indicator means that this machine is not connected
to a faucet, the faucet is not turned on, and/or the water tank is not full. If the water tank is
full, the panel will display a white indicator .
Water Tank Mode
Reminder: If the machine is being used for the first time or has not been used in a long time,
insufficient water flow may occur when the water tank is filled due to trapped air in the
machine’s water pipe system, which prevents the water from flowing into the machine
interior. In this case, you can slightly shake the machine 5-6 times to exhaust all trapped air.
This will ensure a smooth water flow.
1. Open the water tank lid and fill with about 1.3 gallons (5 L) of water, or approximately 3
pitchers. When the tank is full, beeps will be heard. There is no need to add more water
during the washing process.
NOTE: To prevent loss of the tank lid, attach it to the water tank.
2. If the water tank is not full when you start a wash cycle, a red flashing water shortage
indicator will display on the panel and the buzzer will beep. When the water tank is
full, a white water tank mode indicator will appear.
3. Before starting any wash cycle, if the machine detects that the water tank is full, it will
automatically switch to the water tank mode.
4. To drain the water tank by hand, pause the wash cycle and press and hold both the Dry
button and Power button simultaneously for 3 seconds. If the water tank will not be used
for a long time, it is recommended to empty the water tank.
5. The system will automatically check all water supplies. If the red water shortage indicator
appears, you will need to fill the water tank or turn on the faucet. Once the water tank is filled,
the machine will automatically start the wash cycle you selected with no need to press the
Start/Pause button again. In the faucet mode, it is required to press the Start/Pause button
again to start the wash cycle after you open the faucet.
NOTE: In the case of a water shortage, if you press the Start/Pause button 5 times and
there is still no adequate water supply, the machine will automatically enter standby mode.
Or, if there is no user operation or water supply for 10 minutes, the machine will automatically
enter standby mode.
TECHNICAL SPECIFICATIONS
OPERATING INSTRUCTIONS
Loading the Dishwasher Basket
• Remove large, hard food scraps before loading tableware into the dishwasher.
Model
Voltage/Frequency
Power
Inlet Pressure
Water Tank Capacity
Dry Mode
Noise Level
Product Weight
Product Size
TDQR01
120 V/60 Hz
950 W
0.04-1 MPa
1.3 gallons (5 L)
PTC hot air
50 dB
28.7 lb (13 kg)
16.86 × 16.75 × 18.05 in (428 × 425 × 458 mm)
Loading ...
Loading ...
Loading ...