Broan B5336SS Installation Guide

Loading ...

MODELS B5330SS • B5336SS

Page 2

OPERATION

The hood is operated using the push buttons on the front panel.

Push the light button to turn the lights on and off.

Push the fan controls to select low, medium, or high blower

speed.

Push the OFF button to turn the blower off.

OFF

LOW

MED.

HIGH

LIGHT

FAN CONTROLS

ON/OFF

LIGHT BULBS

VQ0009

WARNING

Bulbs may be hot. Always allow bulbs to cool down before

removing them.

This range hood requires two halogen bulbs (Type JC, 12V, 20W

Max, G-4 Base - included).

To change bulbs:

1. Remove light bulb cover by gently pushing it upward and

turning it counterclockwise.

2. Replace bulb.

3. Re-install light bulb cover by gently pushing it upward and

turning it clockwise.

LIGHT BULB COVER

CLEANING AND MAINTENANCE

Proper maintenance of the Range Hood will assure proper

performance of the unit.

MOTOR

The motor is permanently lubricated and never needs oiling. If

the motor bearings make excessive or unusual noise, replace

the motor with the exact service motor. The impeller should also

be replaced.

GREASE FILTER

The grease filter should be cleaned frequently. Use a warm

detergent solution. Grease filter is dishwasher safe.

Clean all-metal filters in the dishwasher using a non-phosphate

detergent. Discoloration of the filter may occur if using phosphate

detergents, or as a result of local water conditions - but this will

not affect filter performance. This discoloration is not covered

by the warranty.

Remove grease filter by pushing back on the metal latch tab. This

will disengage the filter from the hood. Tilt the filter downward

and remove.

NON-DUCTED RECIRCULATION FILTERS

The non-ducted recirculation filters should be changed every

3-6 months. Replace more often if your cooking style generates

extra grease, such as frying and wok cooking.

Rotate the filters to remove them from the blower and replace.

STAINLESS STEEL CLEANING

DO:

• Regularly wash with clean cloth or rag soaked with warm

water and mild soap or liquid dish detergent.

• Alwayscleaninthedirectionoforiginalpolishlines.

• Alwaysrinsewellwithclearwater(2or3times)afterclean-

ing. Wipe dry completely.

• You may also use a specialized household stainless steel

cleaner.

DON’T:

• Useanysteelorstainlesssteelwooloranyotherscrapersto

remove stubborn dirt.

• Useanyharshorabrasivecleansers.

• Allowdirttoaccumulate.

• Letplasterdustoranyotherconstructionresiduesreachthe

hood. During construction/renovation, cover the range hood

to make sure no dust sticks to the stainless steel surface.

Avoid: When choosing a detergent

• Anycleanersthatcontainbleachwillattackstainlesssteel

• Any productscontaining:chloride,fluoride,iodide, bromide

will deteriorate surfaces rapidly.

• Anycombustibleproductsusedforcleaningsuchasacetone,

alcohol, ether, benzol, etc., are highly explosive and should

never be used close to a range.

Loading ...

Broan B5336SS 36-Inch Convertible Wall-Mount Chimney Range Hood, 450 CFM, Stainless Steel

Installation Guide - Page 2