Loading ...
Loading ...
Loading ...
20
Wi-Fi Function Introduction
This appliance may be controlled
remotely with a smart phone or a tablet
computer. If the appliance is not
connected to the home network, it will
function like a regular appliance.
What do you need to connect the
appliance?
Signal from the local wireless network
(Wi-Fi) should be sufficiently strong in
the spot where the appliance is
installed.
Home network router has to be
connected to the internet, and the Wi-Fi
function on the appliance should
be activated.
The smart phone/tablet computer
has to be connected to the internet.
Operating system on your smart
phone/tablet computer should be
compatible with the ConnectLife app.
APPLIANCE Wi-Fi STATE
There are three WiFi states as shown
below, you can activate the display
board according to the relevant steps.
CONNECT APPLIANCE TO Wi-Fi
After activating the Wi-Fi function,
connect your device to your home
router in order to connect your
appliance with the ConnectLife mobile
app.
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when ‘--’
appears in the display.
Step 2: Touch the Fridge key to select 'O'
within 60 seconds.
Step 3: Touch the Wi-Fi icon to confirm the
selection mode. The Wi-Fi symbol starts
blinking and the network of this appliance
is now open to connect to, for 5 minutes.
Step 4: When the Wi-Fi symbol is on, it
means that the Wi-Fi connection is
successful. The display will return to
normal.
MULTI-USER PAIR APPLIANCE
The appliance can be paired with your
mobile device. Simply pair another user
to your appliance. This requires, that
your appliance was already set up
before and is connected to your home
network. If not, go back and select SET
UP APPLIANCE.
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when ‘--’
appears in the display.
Step 2: Touch the Fridge key to select 'P'
within 60 seconds.
Step 3: Touch the Wi-Fi icon to confirm
the selection mode. The PAIR network of
this appliance is now open to
connect
to, for 5 minutes.
Step 4: When the display will return to
normal, it means the PAIR connection is
successful.
Display controls
Loading ...
Loading ...
Loading ...