Loading ...
Loading ...
Loading ...
Melntenence
Oven Door
Leveling Legs
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
i Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window (select models)
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
F_
Be sure the range is leveled when installed. If II/]
the rangeis not level, turn the leveling legs, II[LII
located at each corner of the range, until /1_._
range is level. _i_/
"_'__IP BRACKET
\ LEVELING LEG
Oven Light (selectmodels)
To Replace Oven Light Bulb:
1. When oven iscool, hold bulb cover (if equipped) inplace, then
slide wire retainer off cover.
Note: Bulb cover will fall if not held in place while removing
wire retainer.
1
2. Remove bulb cover and light bulb.
BULB COVER
3. Replace with a 40-watt appli-
ance bulb.
4. Replace bulb cover and se-
cure with wire retainer.
5. Reconnect power to range.
Reset clock.
RETAINER
23
Loading ...
Loading ...
Loading ...