Loading ...
Loading ...
Loading ...
37
www.aeg.com
Do not use high pressure or stream jet
cleaning appliances.
16.1. Front Surface
Normally you just need to clean the
oven with a damp cloth. If it is very
dirty, add a few drops of dishwashing
liquid to the cleaning water.
Afterwards, wipe the oven with a dry
cloth.
In an oven with an aluminium front,
use a glass cleaning product and a
soft cloth that does not release any
fibres or threads. Wipe from side to
side without exerting any pressure on
the surface.
Immediately remove lime, fat, starch or
egg white stains. Corrosion can occur
under these stains. Do not let any
water get inside the oven.
16.2. Oven interior
After each time the oven is used, clean
the inside walls with a damp cloth
since this is the easiest way to remove
splashes or spots of food that may
have stuck to the inside.
To remove dirt that is harder to shift,
use a non-aggressive cleaning
product. Do not use oven sprays or
other aggressive or abrasive cleaning
products.
Always keep the door and the oven
front very clean to ensure that the door
opens and closes properly.
Make sure water does not enter the
microwave ventilation holes.
Regularly take out the turntable plate
and the respective support and clean
the cavity base, especially after any
liquid spillage.
Do not switch on the oven without the
turntable and the respective support
being in place.
If the oven cavity is very dirty, put a
glass of water on the turntable and
switch on the microwave oven for 2 or
3 minutes at maximum power. The
steam released will soften the dirt
which can then be cleaned easily
using a soft cloth.
Unpleasant odours (e.g. after cooking
fish) can be eliminated easily. Put a
few drops of lemon juice in a cup with
water. Put a spoonful of coffee in the
cup to avoid the water boiling over.
Heat the water for 2 to 3 minutes at
maximum microwave power.
16.3. Oven ceiling
If the oven ceiling is dirty, the grill can
be lowered to make cleaning easier.
To avoid the danger of burning, wait
until the grill is cold before lowering it.
Proceed as follows:
1. Turn the grill support by 180º (1).
2. Lower the grill gently (2). Do not
use excessive force as this may
cause damage.
3. After cleaning the ceiling, put the
grill (2) back in its place, carrying
out the previous operation.
IMPORTANT WARNING: The grill
heating element support (1) may fall
when it is rotated. If this happens,
insert the grill heating element support
(1) into the slot in the ceiling of the
cavity and rotate it 90º to the grill
heating element support (2) position.
The mica cover (3) located in the
ceiling must always be kept clean. Any
food remains that collect on the mica
cover can cause damage or provoke
sparks.
Do not use abrasive cleaning products
or sharp objects.
To avoid any risk, do not remove the
mica cover.
The glass lamp cover (4) is located on
the oven ceiling and can be removed
easily for cleaning. For this you just
need to unscrew it and clean it with
water and dishwashing liquid.
Loading ...
Loading ...
Loading ...