Tripp Lite PDUMNH32HVAT 7.7kW Single-Phase 200-240V Monitored Automatic Transfer Switch PDU, Two 32A IEC309 32A Blue Inputs, 1 IEC309 32A Outlet, 1U

OWNER’S MANUAL - Page 9

For PDUMNH32HVAT. Series: AG-012F
Also, The document are for others Tripp Lite models: PDUMNH16HVAT, PDUMNH20HVAT, PDUMNH30HVAT

PDF File Manual, 76 pages, Read Online | Download pdf file

PDUMNH32HVAT photo
Loading ...
Loading ...
Loading ...
9
4. Digital Display
1
Source Status LEDs: Lit LED patterns indicate which source is preferred, which are available
for use, and which is currently being used. See Source Status LED Indicators section for an
explanation of the LED patterns.
2
3-Digit Display: Shows measured or calculated values such as Amperage, Kilowatts, Voltage,
Frequency, Power Factor and Temperature.
3
Mode Button: Scroll through the Display and Config menus using this button. Display menu
choice is shown on 2-digit display. Config menu choice is shown on 3-digit display.
4
Enter Button: When a menu is selected using the Mode Button, the Enter Button scrolls
through the submenus within each category. Submenus are shown by the Indicator LEDs.
Note: Pushing the Enter and Mode button simultaneously for 2 seconds displays the IP address.
5
Indicator LEDs: Lit LED indicates which value is being displayed on the 3-digit screen.
Amps (A): The input current on the selected Source Input (A or b) or Output Load Circuit
(C) is displayed in amps.
Wattage (kW): The Output Power for the Output Load Circuit (C) is displayed in kW.
Voltage (V): The Source A or B Input voltage (A or b) or Output Load Circuit voltage (C) is
displayed in volts.
Frequency (Hz): Source Input A or B frequency is displayed in Hz.
Power Factor (PF): Output Load power factor is displayed as a decimal (from 0 to 1.00).
6
2-Digit Display: This display indicates which display mode is selected: Input Source (A or b),
Output Circuit (C), or Temperature (tC or tF).
Source A (A): Displays measurements for Source A. They include current (A), Voltage (V)
and Frequency (Hz).
Source B (b): Displays measurements for Source B. They include current (B), Voltage (V)
and Frequency (Hz).
Output Circuit (C): Displays measurements for Output Circuit. They include Current (A),
Kilowatts (kW), Voltage (V) and Power Factor (PF).
Temperature (t): The ambient temperature is displayed when this option is selected. The
temperature is displayed in Celsius by default, but can be switched to Fahrenheit.
1 34
2 5 6
21-06-222-933683.indb 921-06-222-933683.indb 9 11/29/2021 3:56:18 PM11/29/2021 3:56:18 PM
Loading ...
Loading ...
Loading ...