Dji MINI 4 PRO User Manual

Loading ...

DJI Mini 4 Pro

User Manual

2. Plan a Waypoint Flight

Tap on the operation panel to set the parameters for the ight route such as Global

Speed, the behavior of End of Flight, On Signal Lost, and Start Point. The settings apply to all

waypoints.

Global Speed

The default ight speed of the entire ight route. Drag the speed bar to

set the global speed.

End of Flight

The behavior of the aircraft after the flight task ends. It can be set to

Hover, RTH, Land or Back to Start.

On Signal Lost

The behavior of the aircraft when the remote controller signal is lost

during ight. It can be set to RTH, Hover, Land or Continue.

Start Point

After selecting the start waypoint, the ight route will be started from

this waypoint to the subsequent waypoints.

• When using Waypoint Flight in the EU, the behavior of the aircraft when the remote

controller signal is lost cannot be set to Continue.

3. Waypoint Settings

a. Pin Waypoint

Waypoints can be pinned via the map before takeo.

Waypoints can be pinned via the following methods after takeo, GNSS is required.

• Using the Remote Controller: Press once on the Fn button (RC-N2) or the C1 button (DJI

RC 2) to pin a waypoint.

• Using the Operation Panel: Tap

on the operation panel to pin a waypoint.

• Using the Map: Enter the map view and tap on the map to pin a waypoint.

Press and hold on a waypoint to move its position on the map.

Loading ...

Dji MINI 4 PRO