Loading ...
Loading ...
Loading ...
5
ENG
Please make sure upon positioning this product,
the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not install this equipment in a confined space
such as a bookcase or similar unit.
• Do not install the TV set near heat sources such as
radiators, stoves or other audio visual equipment
that produce heat.
• Do not place containers with liquids, if liquid falls
inside the products it may result in short-circuit, fire
or electric shock.
• Do not place small metallic objects on top of the
unit. Metal object falls inside the product it may
result in short-circuit, fire or electric shock.
• Do not use or store flammable or combustible
materials near the unit. Doing so may result in
fire or explosion. Do not place any naked flame
sources, such as lit candles, cigarettes or incense
sticks on top of the TV set.
• The antenna must be installed away from high-
voltage power line,
• Please contact an antenna professional installer to
install the antenna to avoid incorrect installation
which could result in fire, electric shock or serious
injury.
• Install the unit at a reasonable distance from the
wall to ensure sufficient ventilation.
• If mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall
remain readily operable.
This symbol indicates that the appliance has double insulation between the dangerous mains
voltage and the parts accessible to the user. In the event of repairs use only identical spare parts.
Install the stand as described below, or if you want to mount it to a wall, please contact a professional installer.
Please ensure the TV is not plugged into the wall socket and furthermore we recommend to get another
person to assist in the following task.
Step 1
Place a soft cushioned material on top of a flat
surface to prevent damaging the screen panel.
Then place the TV screen flat on top, with the
screen side facing down, as illustrated on the
right.
Step 2
Align the stand leg to the installation point, as
illustrated below
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the panel, as
illustrated on the right.
INSTALLATION
Attaching the stand
CAUTION!
Do not apply excessive force as this may damage the screw holes.
Loading ...
Loading ...
Loading ...