Loading ...
Loading ...
Loading ...
50
TROUBLESHOOTING
Operation
Vibrating noise Not all levelling feet are resting firmly and evenly on the floor.
• See the
Levelling the Appliance
instruction to adjust the levelling of the
appliance.
Floor not rigid enough.
• Check if the floor is sold and does not flex. See the
Installation Place
Requirements
to select the proper location.
Symptoms Possible Cause & Solution
Water is leaking. House drain pipes are clogged.
• Unclog waste pipes. Contact plumber if necessary.
Leakage is caused by improper installation of drain hose or clogged
drain hose.
• Clean and straighten the drain hose. Check and clean the drain filter
regularly.
Drain pump filter cap is not fitted correctly.
• Refit the drain pump filter.
Appliance does not
operate.
Control panel has powered off due to inactivity.
• This is normal. Press the
Power
button to turn the appliance on.
Appliance is unplugged.
• Make sure that the cord is plugged securely into a working outlet.
Water supply is turned off.
• Turn the water supply tap completely.
Controls are not set properly.
• Make sure that the programme is correctly set. Close the door and press
the
Start/Pause
button.
Door is open.
• Close the door and make sure that nothing is caught under the door
preventing it from closing completely.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will
resume the programme where it stopped once power is restored.
Control needs to be reset.
• Press the
Power
button, then reselect the desired programme and press
the
Start/Pause
button.
Symptoms Possible Cause & Solution
global_main.book.book Page 50 Tuesday, December 6, 2022 8:07 AM
Loading ...
Loading ...
Loading ...