Loading ...
Loading ...
Loading ...
Setting Surface Controls
Setting the Triple Burner
The Triple Burner has three rings of flame that you can control for two different
heat levels, one for small and one for large cookware.
Small Cookware Operation (Figure 1 ; Zone A)
1. Place a small cooking utensil centered over the surface Burner Grate.
2. Push the surface control knob in and turn counterclockwise out of the OFF
position (See Figures 2 & 3).
3. Release the knob and rotate to the LITE position. Note: All electronic surface
ignitors will spark at the same time. However, only the triple Burner will ignite.
4. Visually check that zone A of triple burner has lit. Adjust the flame size by
turning the control knob between the first Hi and LO settings. DO NOT cook
with the surface control knob in the LITE position (The electronic ignitor will
continue to spark if the knob is left in the LITE position).
Large Cookware Operation (Figure 1 ; Zone A & B)
1. Place a large cooking utensil centered over the triple surface
Burner Grate.
2. Push the surface control knob in and turn counterclockwise out of
the OFF position.
3. Release the knob and rotate to the LITE position (Figures 2 & 3).
Note: All electronic surface ignitors will spark at the same time.
However, only the selected surface Burner will ((te.
4. Visually check that zone A of the triple burner has lit.
5. Continue to rotate the gas control knob counterclockwise past the
first LO setting to the arrow marked Multi; zone B will ignite with
two rings of flame.
6. Visually check that all zones of the Triple Burner are lit (Figure 4).
7. When both burners are lit, continue to turn the control knob
counterclockwise to adjust to the desired flame size for both
burners together. Note: The markings between the 2rid HI
and LO settings on the control knob adjust the flame size for
both zone A & B (Refer to Figure 2 or 3). DO NOT cook with
any of the surface control knobs in the LITE position (The
electronic ignitor will continue to spark if the knob is left in the
LITE position).
Figure 1
Off Hi Lo MuFti Hi
Figure 2
)i)........
Lo ] ::'_?/;'::
position
Center Portion of
the Triple Burner
adjustment area
Center 4-Outer Portions
of the Triple Burner
adjustment area
/
Lite position for the
Outer Portion of
the Burner
Figure 3
Figure 4
9
Loading ...
Loading ...
Loading ...