Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42484891-zwm7120/bg26.png)
38 / EN
Washng Machne / User Manual
Problem Reason Soluton
Detergent residue in the
detergent drawer. (**)
Detergent s put n wet drawer.
• Dry the detergent drawer before
puttng n detergent.
Detergent has gotten damp.
• Keep detergents closed n an
envronment free of humdty and
do not expose them to excessve
temperatures.
Water pressure s low.
• Check the water pressure.
The detergent n the man wash compartment got
wet whle takng n the prewash water. Holes of
the detergent compartment are blocked.
• Check the holes and clean f they are
clogged.
There s a problem wth the detergent drawer
valves.
• Call the Authorsed Servce Agent.
Detergent mght be mxed wth the softener.
• Do not mx the softener wth
detergent. Wash and clean the
dspenser wth hot water.
Regular drum cleanng s not appled.
• Clean the drum regularly. For ths,
please see 4.7.2.
Too much foam forms in the
machine. (**)
Improper detergents for the washng machne are
beng used.
• Use detergents approprate for the
washng machne.
Excessve amount of detergent s used.
• Use only suffcent amount of
detergent.
Detergent was stored under mproper condtons.
• Store detergent n a closed and dry
locaton. Do not store n excessvely
hot places.
Some meshed laundry such as tulle may foam too
much because of ther texture.
• Use smaller amounts of detergent for
ths type of tem.
Detergent s put n the wrong compartment.
• Put the detergent n the correct
compartment.
Softener s beng taken early.
• There may be problem n the valves
or n the detergent dspenser. Call the
Authorsed Servce Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent s used.
• Mx 1 tablespoonful softener and
½ l water and pour nto the man
wash compartment of the detergent
drawer.
• Put detergent nto the machne
sutable for the programmes and
maxmum loads ndcated n the
“Programme and consumpton table”.
When you use addtonal chemcals
(stan removers, bleachs and etc),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessve foam mght have occurred and
automatc foam absorpton system mght have
been actvated due to too much detergent usage.
• Use recommended amount of
detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent
any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
CAUTION:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
Loading ...
Loading ...
Loading ...