Loading ...
Loading ...
Loading ...
7
Parts Identication
PARTS IDENTIFICATION
RUBBER SEAL RING ASSEMBLY
Always ensure the Rubber Seal
Ring (18) is properly and securely
tted onto the metal ring in the
interior of the Lid (2). The Rubber
Seal Ring (18) should be placed
into the Lid (2) by tting it around
the outer part of the entire metal
ring making sure that the crease
in the Rubber Seal Ring (18) meets
with the metal ring all the way around.
PRESSURE COOKER LID MARKINGS
Please note the “OPEN” and “CLOSE” markings
on the rim of the pressure cooker body (13) and
the “▼” on the rim of the Lid (2). To properly
close and secure the pressure cooker Lid (2),
always line up the “CLOSE” marking on the
Upper Ring (9) and the “▼” on the rim of the
Lid (2).
CONDENSATION CUP ASSEMBLY
The Condensation Cup (12) is the clear plastic piece that
snaps into the back side of the pressure cooker as shown
on the right. Place condensation cup (12) in rear of the
unit until it locks into place.
PRESSURE LIMITING VALVE WARNING
WARNING: Avoid serious injury. Always use
tongs or a long kitchen tool to set the valve to
Venting.
CAUTION HOT STEAM: KEEP HANDS AND
FACE AWAY FROM THE PRESSURE LIMITING
VALVE WHEN ROTATING TO VENTING.
Loading ...
Loading ...
Loading ...