Loading ...
Loading ...
Loading ...
4
Mounting (Rack)
2
3
4
1
Mount your equipment in either a 4-post or 2-post rack or rack enclosure. The user
must determine the fitness of hardware and procedures before mounting. If hardware
and procedures are not suitable for your application, contact the manufacturer of your
rack or rack enclosure. The procedures described in this manual are for common rack
and rack enclosure types and may not be appropriate for all applications.
4-Post Mounting
All UPS models include hardware required to mount in a 4-post rack. Select models
include an adjustable rack-mount shelf kit to provide additional support. If your UPS
model does not include an adjustable rack-mount shelf kit, skip steps 1 and 2.
Connect the two segments of each shelf
A
using the included screws and nuts
B
.
Leave the screws slightly loose so that the
shelves can be adjusted in the next step.
Adjust each shelf to fit your rack, then mount
them in the lowest available space of your
rack with the screws, nuts and washers
provided
C
. Note that the support ledges
should face inward. Tighten the screws that
connect the shelf segments
B
.
Attach mounting ears
D
to the front mounting
holes of your equipment
E
using the screws
provided
F
. The ears should face forward.
Using an assistant if necessary, lift your
equipment and slide it onto the mounting
shelves. Attach your equipment to the rack
by using the appropriate hardware
G
through
its mounting ears and into the rack rails.
1
2
3
4
B
A
B
C
E
D
F
G
21-10-011 932827-book.indb 4 10/14/2021 1:47:53 PM
Loading ...
Loading ...
Loading ...