Loading ...
Loading ...
Loading ...
14
automatically saved. The speed will go to zero, but the incline level stays the same. Press “PAUSE/
STOP” again to stop the motor, and all date will be cleared.
If you press “START” within 5 minutes, the data of time, distance and calorie will be accumulated,
and the starting speed will be the same as previous speed prior to pressing “PAUSE”.
“PAUSE” function lasts for about 5 minutes. If you do not press “START” again, the data will
automatically clear.
c. “PROG” is for program key. In standby mode, press the key to select manual mode “0.0” to
“P1-P12”, “U1-U3”, “3 HRC” and FAT different programs. Manual mode is the default mode, the
default speed 0.5MPH, the max operating speed is 7.5 MPH.
d. “MODE” is for mode key. In standby mode, press the key to loop set H-1 to H-3 different countdown
modes. H-1 is time countdown mode, H-2 is distance countdown mode and H-3 is calorie
countdown mode. All mode parameter can be set by “SPEED +/–” or “INCLINE +/-”, then press
“START” to start the treadmill.
e. “SPEED+/–” are for speed accelerating and decelerating keys. Press to adjust the treadmill speed
setting. When the treadmill is running, they are used to adjust the speed for 0.1 MPH increment;
after holding for more than 2s, automatic continuous acceleration and deceleration will be realized.
f. Speed shortcut keys: 2/4/6 MPH. Press any speed shortcut keys when the treadmill is running.
g. “INCLINE +/–” are for incline accelerating and decelerating keys. Press to adjust the treadmill
incline setting. When the treadmill is running, they are used to adjust the incline for 1 grade
increment; after holding for more than 2s, automatic continuous increasing or reducing will be
realized.
h. Incline shortcut keys: 3/6/9 grade. Press any incline shortcut keys when the treadmill is running.
KILOMETERS OR MILES
When the safety key is removed, press “PROG” and “MODE” for 5 seconds to change from miles to
kilometers. Display “12.0” means metric systems when display “7.5” means imperial systems.
DISPLAY FUNCTION
Speed display: Display the current running speed.
Time display: Display the running time in manual mode and display the countdown time in the time
countdown mode or in program mode.
Steps/Distance/Calorie display: Display the current running Steps. (Note：Running steps valid in
users when speed less than 2.0 MPH or more than 10.0 MPH, due to differences in user's weight and
step rate.) Display the accumulated distance in manual mode or program mode or the countdown
distance in distance countdown mode. Display the current calories.
Heart rate/Incline display: Detect heat rate signals and pulse value and current Incline.
Data display range of various parameters:
TIME: 0:00 – 99.59 (MIN)
DISTANCE: 0.00 – 99.9 (MILE)
CALORIES: 0.0 – 999 (KCal)
SPEED: 0.5 – 7.5 (MPH)
PULSE: 50 – 200 (BPM)
INCLINE: 0 – 15%
Loading ...
Loading ...
Loading ...