Loading ...
Loading ...
Loading ...
Operation
10 10
Changing Moisture Mode Level
Press and hold the ‘Steam’ Key until the ‘H-X’ level is
displayed and flashing in the upper display.
Rotate the ‘Temp’ Knob -/+ to select Moisture Mode level
required.
Press the STEAM Key to confirm setting.
The ‘Moisture’ Mode level can be changed at anytime during
operation by following the setting method as described above.
An Optional Core Temp Probe Kit #236060 is available for
this oven.
This allows use of the Core Probe Cooking feature of this oven.
When the core probe is fitted to the connection point on control
panel side, the timer function and display becomes the core temp
probe temperature setting and display. Cooking completion is then
determined by the core temp probe reaching the set core probe
temperature.
To enable Core Probe Cooking Mode plug in the Core Probe.
The Timer Display will then change to '
CP'
(Core Probe).
The Timer Knob function will then be for Core Temp setting.
To disable Core Probe Cooking Mode, unplug the Core Probe.
The Timer Display and Knob will return to time function.
In Manual Mode the ovens settings are.
- Temperature Settings - 50-250C / 150-550F.
- Timer Settings - 0-180min or Infinite.
- Moisture Mode Settings - Off / On-Level.
- Oven Lights Settings - Off / On.
An Optional Core Probe can also be used in Manual Mode.
In Program Mode 20 Programs are able to be used.
In each program the following settings are possible.
- Temperature Settings - 50-250C / 150-550F.
- Timer Settings - 0-180min or Infinite.
- Moisture Mode Settings - Off / On-level.
- Oven Lights Settings - Off / On.
Three cooking stages can also be set in each of the 20 programs.
- All settings can be changed between cooking stages.
- At completion of each stage an end of stage alarm can also
be set.
Optional Core Probe can also be used in Program Mode.
Changing between Manual to Program Modes
Press ‘Program’ key to select Program Mode. The LED
will illuminate showing Program Mode now set.
Press ‘Program’ Key to return to Manual mode.
There are 6 levels of pre-set moisture injection.
Each level defines the number of moisture injection pulses per
moisture cycle during oven operation.
H-0 Manual Moisture Mode. Automatic Moisture Injection is ‘Off’.
Pressing ‘Steam’ key in this mode will inject 1 shot of steam
into the oven, ie, no steam injection without user input.
H-1 Level 1. - Minimum automatic moisture injection setting. One
moisture pulse per moisture cycle.
H-2 Level 2.
H-3 Level 3.
H-4 Level 4.
H-5 Level 5. - Maximum automatic moisture injection setting.
Five moisture pulses per moisture cycle.
Selecting Moisture Mode
Press ‘Steam’ key to activate Moisture Mode. ‘Steam’
key LED will illuminate when Moisture Mode is ‘On’.
Moisture Mode will operate at the preset level during the
cooking cycle.
• When Moisture Mode H-0 is selected, a shot of steam is
available whenever the oven is running, by pressing the
‘Steam’ key.
• When Moisture Mode H-1 to H-5 are selected, these
moisture modes will only operate when a program is
running, Core Temp Probe Mode has been selected or when
a timer is running in Manual Mode.
• When setting Moisture level, consider the Oven Set
Temperature. If set BELOW 100°C (212°F), water may pool
in oven as temperature will be too low to create steam.
Loading ...
Loading ...
Loading ...