Loading ...
Loading ...
Loading ...
Black plate (162,1)
Model "F15-D" EDITED: 2010/ 6/ 24
trols” section.)
*: Temperature is displayed 8F (US) or 8 C (Canada).
AUTOMATIC AIR CONDITIONER (with
Integrated Control System)
Automatic operation (AUTO)
The AUTO mode may be used year-round as the
system automatically controls constant tempera-
ture, air flow distribution and fan speed.
To turn off the heater and air conditioner, push
the CLIMATE button to change to the Climate
Control Mode, then push the OFF button.
Cooling and dehumidified heating:
1. Push the AUTO button. (The AUTO indicator
will be displayed.)
2. Turn the temperature control dial to set the
preferred t emperature. The temperature
range is between 608F (188C) and 908F
(328C).
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C off):
1. Push the CLIMATE button to change to the
Climate Control Mode.
2. Push the AUTO button. (The AUTO indicator
will be displayed.)
3. If the A/C indicator light illuminates, push the
A/C button. (The A/C indicator light will turn
off.)
4. Turn the temperature control dial to set the
preferred t emperature. The temperature
range is between 608F (188C) and 908F
(328C).
. Do not set the temperature lower than
the outside air temperature. Doing so
may cause the temperature to not be
controlled properly.
. If the windows fog up, use dehumidified
heating by pushing the A/C button (the
A/C indicator light will illuminate).
Dehumidified defrosting/defogging:
1. Push the front defroster
button. (The
indicator light will illuminate.)
2. Turn the temperature control dial to set the
preferred temperature.
. To remove moisture or fog on the front
window quickly, set the temperature to
the high temperature and the fan speed
to their maximum level.
. After the windshield is cleared, push the
front defroster
button again. (The
indicator light will turn off.)
. When the front defroster
button is
pushed, the air conditioner will auto-
matically turn on to defog the wind-
shield. The outside air circulation mode
will be selected to improve the defog-
ging performance.
. When the
position is selected, the
air recirculation mode cannot be turned
on to prevent the windows from being
fogged up.
Manual operation
The manual mode can be used to control the
heater and air conditioner to your desired
settings.
To turn off the heater and air conditioner, push
the OFF button.
If the Drive Mode is indicated on the screen,
push the CLIMATE button to change to the
Climate Control Mode, then push the OFF
button.
Fan speed control:
Turn the fan speed control
dial to adjust the
fan speed.
Air flow control:
Pushing the preferred air flow control button the
air outlet to:
4-18 Heater, air conditioner, audio and phone systems
Loading ...
Loading ...
Loading ...