Loading ...
Loading ...
Loading ...
Black plate (99,1)
Model "F15-D" EDITED: 2010/ 6/ 24
SAA1232
Be sure not to put anything on top of the
photo sensor
*
1
located on the top of the
instrument panel. The photo sensor con-
trols the autolight; if it is covered, the
photo sensor reacts as if it is dark and the
headlights will illuminate.
SIC3670
Headlight beam select
*
1
To select the low beam, put the lever in the
neutral position as shown.
*
2
To select the high beam, push the lever
forward while the switch is in the
position. Pull it back to select the low beam.
*
3
Pulling the lever toward you will flash the
headlight high beam even when the head-
light switch is in the OFF position.
Battery saver system
. When the headlight switch is in the or
position while the ignition switch is in
the ON position, the lights will automatically
turn off 5 minutes after the ignition switch
has been placed in the OFF position.
. When the headlight switch remains in the
or position after the lights
automatically turn off, the lights will turn on
when the ignition switch is placed in the ON
position.
CAUTION
. When you t urn on the headlight
switch again after the lights auto-
matically turn off, the lights will not
turn off automatically. Be sure to
turn the light switch to the OFF
position when you leave the vehicle
for extended periods of time, other-
wise the battery will be discharged.
. Never leave the light switch on
when the engine is not running for
extended periods of time even if the
headlights turn off automatically.
Daytime running light system (Canada
only)
The daytime running lights automatically illumi-
nate when the engine is started with the parking
brake released. The daytime running lights
operate with the headlight switch in the OFF
position or in the
position. Turn the
headlight switc h to the
position for full
Instruments and controls 2-35
Loading ...
Loading ...
Loading ...