Clore Automotive JNC770R User Manual

Loading ...

Performance and Temperature

Performance of your Jump-N-Carry will depend upon several factors:

• Agood,solidconnectionbetweentheJump-N-Carry clamps and the battery

andgroundconnectionsareamust.Movingtheclampsbackandforthwhile

connecting to the battery will help create a better connection.

• Cleanconnectionsbetweenyourvehicleorequipmentbatteryanditsterminals

are very important. For an optimal connection, corrosion (soft grayish-white build-

up) on battery terminals must be removed. With the ignition turned off, disconnect

the battery cables and clean the terminals and battery posts with a baking soda

solution.

• Allbatteriesareaffectedbytemperaturechanges,andthesmall,lightweight

battery in the Jump-N-Carry is more sensitive to storage temperature than a

standard automotive battery. Temperatures below 70ºF decrease amperage output.

Theidealstorageenvironmentisroomtemperature,or68ºF.

USB Power

Your Jump-N-Carry featurestwoUSBoutlets,one2.1Amaximumoutputandone1.1A

maximum output.

ToactivetheUSBoutlets,quicklypresstheLightButtononthecontrolpanel.You

shouldseetheUSBstatuslight,locatedbetweentheUSBoutlets,lightgreen.This

indicatestheUSBoutletsarenowpowered.

LED Work Light

Your Jump-N-Carry isequippedwithahighintensityLEDwork/flashlightforusewhen

jump starting at night or when additional light is needed to complete a task.

Toturnthelighton,pressandholdtheLightButtononthecontrolpanelfor3seconds.

A second quick press switch the light’s output to flashing. A third quick press will turn

the light off.

12 Volt DC Power

Your Jump-N-Carry is an essential tool for all who replace automobile batteries.

Mostvehicleshaveelectroniccomponentswithmemory,suchasalarmsystems,

computers, radios, phones, etc. and when the vehicle’s battery is replaced, the memory

islost.However,iftheMale-MaleExtensionCordisconnectedfromtheJump-N-Carry

tothe12Voltoutletonthevehicle,thememorycanbesaved.

Note: To use the Jump-N-Carry for this purpose, the chosen outlet must be live

whenthe vehicle is turned OFF. On some vehicles, 12 Volt outlets are deactivated

when the vehicle is turned OFF.

Your Jump-N-Carryisalsoaportablepowersourceforall12Vdcaccessories

equippedwithamale12Voltplug.TheDCoutletontheJump-N-Carry has automatic

overload protection.

When your Jump-N-Carry is used with a DC to AC power inverter, it can operate

appliancesnormallypoweredby120Vacor220Vac.Recommendedinverterforthe

portablepowersourceis400wattsmaximum.Formoreinformation,contactyour

nearest Jump-N-Carry dealer.

Loading ...

Clore Automotive JNC770R Jump-N-Carry 1700 Peak Amp Premium 12 Volt Jump Starter