Loading ...
Loading ...
Loading ...
4. If the small hour hand and small minute
hand are not at 12 o’clock, rotate the
crown to align them correctly.
5. Press (C).
Confirm that “UTC” is centered in the
indicator window.
30
Indicator window
6. If “UTC” is not positioned in the center of
the indicator window, rotate the crown
until it is.
7. Press (C).
Confirm that the day of the week hand is
stopped at 12 o’clock, and check if the day
is indicated properly.
30
30
Day (Operation start day)
Day of the week hand
8. If the day of the week hand and or the day
indicator is out of alignment, rotate the
crown to move the day of the week hand
to 12 o’clock and the day to the center of
the indicator window.
●
The movement range of the day of the
week hand and day indicator is limited
when you rotate the crown. The
maximum left-right movement of the
day of the week hand is 180 degrees in
either direction. The day indicator
moves only slightly.
●
After the day of the week hand and day
indicator are in the positions you want,
advance to step 11 of this procedure. If
you are unable to make the adjustments
you want, go to step 9.
9.
Press (C).
Confirm that the day indicator shows “1”.
1
1
Day
●
Changing the date setting will cause the
day of the week hand to rotate
repeatedly. In some cases, the day of
the week hand may continue to rotate
for about 5 minutes.
l
Hand and Day Indicator Movement
10. If “1” is not shown for the day, rotate the
crown until “1” is shown for the day.
●
The day of the week hand moves in
conjunction with crown rotation. Move
the day of the week hand to 12 o’clock.
11. Push the crown back in.
Note
●
Leaving the crown pulled out for more
than approximately 30 minutes without
performing any operation will
automatically cause the adjustment
operation to become disabled. If this
happens, push the crown back in to its
normal position and then pull it out
again to restart the procedure from the
beginning. Pushing the crown in to its
normal position part way through the
alignment procedure will cause the
hands to return to their normal position.
Any alignment you performed up to
that point will be applied.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
● Before Boarding
Configure the World Time to the current time
at your destination.
30
Destination time
Current time
l
Specifying a World Time City
● Prior to Takeoff
Enter the watch’s Airplane Mode when
instructed to do so by airline personnel.
30
Airplane mark
l
Using the Watch in a Medical Facility or
Aircraft
● After Arriving
1. Swap the origin time zone time with the
destination time zone time.
30
30
After swappingBefore swapping
Destination time Destination time
l
Swapping Your Home City Time and
World Time
2. Exit the Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 5531
19
Loading ...
Loading ...
Loading ...