Loading ...
Loading ...
Loading ...
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
between the watch and phone, the
second hand moves to [C].
●
If pairing fails for some reason, the
second hand will move to “N” and then
return to its normal movement. Perform
the pairing procedure again from the
beginning.
C mark
Note
●
The first time you start up CASIO
WATCHES, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Adjustment
You can configure watch settings to connect
with a phone at preset times each day and
adjust its time settings in accordance with
information obtained from an online time
server.
● Using This Function
Your watch adjusts its time setting four times
a day according to a preset schedule. It
performs the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
The watch may not be able to perform
auto time adjustment under the
conditions described below.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
Note
●
If the watch does not indicate the
correct time even if is able to connect
with a phone, adjust the hand and date
indicator positions.
l
Adjusting Hand and Day Indicator
Alignment
●
If there is a World Time City specified
with CASIO WATCHES, its time will
also be synchronized automatically.
●
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m., and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
●
GPS signal or time calibration signal
auto receive will be performed if there
has been no auto time adjustment
based on connection between the
watch and phone for more than one
day.
● Triggering Immediate Time Adjustment
The watch will synchronize its time setting to
that of the phone immediately when they are
connected with each other. Whenever you
want to adjust the watch’s time setting based
on your phone's time, perform the procedure
below to connect with a phone.
1.
X
Hold down (B) for about 0.5 seconds.
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch’s time setting
will be adjusted.
●
After time synchronization is complete,
the watch will display the acquired
Home City and the day of the week hand
will indicate the approximate latitude of
your current location. Next, the
connection will be terminated.
●
If time synchronization fails for some
reason, the second hand will move to
“N” (NO).
30
Home City
Equator
North Pole
Latitude
Configuring World Time
Settings
Specifying a World Time City with CASIO
WATCHES causes the city’s time to be
indicated by the small hour and minute hands.
Watch settings can be configured for auto
summer time switching for the World Time
City.
3
0
Note
●
CASIO WATCHES World Time lets
you select from among approximately
300 cities as the World Time City.
● Selecting a World Time City
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
You can determine whether a World
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour (24-hour)
World Time hour and minute
Operation Guide 5531
11
Loading ...
Loading ...
Loading ...