Loading ...
Loading ...
Loading ...
8 | Westinghouse Outdoor Power Equipment
Cool Mode Indicator
When the cool mode indicator above the mode button is lit,
the unit is operating in cool mode. In this mode, the fan and
the compressor run at the same time. The display will show
the set temperature.
NOTE: In cool mode, the temperature can be set between
61°F (16°C) and 86°F (30°C).
Dry Mode Indicator
When the dry mode indicator above the mode button is lit,
the unit is operating in dry mode. In this mode, the unit acts
as a humidier removing moisture from the air. The display
will be blank.
Fan Mode Indicator
When the fan mode indicator above the mode button is
lit, the unit is operating In this mode, the fan runs but the
compressor does not. The display will be blank.
Mode Button
Press the mode button to cycle between Cool, Dry and Fan
modes.
Timer Button (Timer Mode)
Use the timer button to turn the air conditioner on at a certain
time. For instance, the air conditioner can be set to begin
cooling in ve hours.
To schedule cooling, put the air conditioner in cool mode
and select a temperature. Press the timer button, then
use the increase/decrease buttons (“+” or “-”) to adjust the
timer setting by 30 minutes (up to 10 hours). Once your
desired time is selected, wait ve seconds for the input to be
accepted. The timer LED above the timer button will light up
indicating that the unit is in timer mode.
At the selected time, the unit will begin scheduled cooling.
Timer Button (Sleep Mode)
To conserve energy, the air conditioner can be programmed
to gradually decrease cooling during sleeping hours.
Press and hold the timer button for three seconds to enter
into sleep mode. The sleep LED above the timer button will
light up indicating that the unit is in sleep mode.
In sleep mode, the preset temperature will increase by
2°F (1°C) within one hour and 4°F (2°C) within two hours.
After the second hour, the unit will operate at the elevated
temperature.
NOTE: The sleep function is not available in fan mode or
dry mode.
On/Off Button
Use this button to turn the air conditioner on or off.
Fan Button
Press the fan button to cycle between low and high speeds.
Fan Speed Indicators
The indicators above the fan button show indicate fan speed.
ADDING/REPLACING REMOTE BATTERIES
See Figure 26, page 18.
lSlide the battery cover off of the remote control.
lInstall new AAA batteires (1.5V) into the remote control
according to their polarity.
lReplace the battery cover.
USING THE REMOTE CONTROLLER
See Figure 26, page 18.
Use the remote control to operate the air conditioner from
a distance.
Fan Speed Button
Press the fan speed button to cycle between low and high
speeds.
Fan Only Button
Press the fan only button to run the air conditioner in fan
mode. In this mode, the fan runs but the compressor does
not.
Cool Button
Press the cool button to run the air conditioner in cool mode.
In this mode, the fan runs but the compressor does not.
Dry Button
Press the dry button to run the air conditioner in dry mode.
In this mode, the unit acts as a humidier removing moisture
from the air.
On/Off Button
Use this button to turn the air conditioner on or off.
Increase/Decrease Buttons
Press the increase/decrease buttons (“+” or “-”) to change
the temperature in cool mode and adjust timer or sleeper
settings.
OPERATION
Loading ...
Loading ...
Loading ...