Loading ...
Loading ...
Loading ...
Cameras
Install the cameras (separately purchased) in the
appropriate position according to the instructions
supplied with the cameras.
Connecting a front/rear view camera
See page 57.
• To use the rear view camera, a reverse lead (REVERSE)
connection is required (page 58).
• When connecting the front/rear view camera, set
the <Front Camera> and <Rear Camera> settings
correctly (page 48).
Connecting a camera to the AV-IN
terminals
See page 57.
• When connecting the external camera to the AV-IN
terminals, select [Camera] for the <AV Input>
setting (page 49).
For the rear view camera: The rear view screen
is displayed by shifting the gear to the reverse (R)
position when <Rear Camera Interruption> is set to
[ON] (page 48).
• A caution message appears on the screen. To
remove the caution message, touch the screen.
For the front view camera: The front view screen is
displayed by releasing the gear from the reverse (R)
position when <Front Camera Interruption> is set to
other than [OFF] (page 48).
Other External ComponentsOther External Components
To display parking guide line
(Only for the rear view camera)
Touch the area shown below, or set <Parking
Guidelines> to [ON] (page 48).
• To close the parking guidelines, touch the same area
again.
To exit the camera screen
Press the HOME button on the monitor panel or touch
the area shown below.
• When the gear is released from the reverse (R)
position, the screen also returns to the previous
playback source screen.
Watching camera view
1 Display the camera view.
From the Home screen (page 3), touch as
follows:
The camera view screen of one of the connected
camera is displayed.
2 Change the camera view.
Touch the upper portion of the screen shown
below.
• Each time you touch, camera view changes
among front view camera, rear view camera, and
AV-IN camera.
35
ENGLISH
00DMX709SKN.indb3500DMX709SKN.indb35 2022/06/2414:142022/06/2414:14
Loading ...
Loading ...
Loading ...