Loading ...
Loading ...
Loading ...
66
Unpacking the Appliance
Unpacking the Appliance
Lifting the Appliance Off
the Foam Base
After removing the carton and shipping
material, lift the appliance off the foam
base.
• Make sure the tub support
A
* comes
off with the base and is not stuck to the
bottom of the appliance.
• If you must lay the appliance down to
remove the carton base
B
, always
protect the side of the appliance and
lay it carefully on its side. Do not lay the
appliance on its front or back.
* This feature may vary depending on
the model purchased.
Removing the Transit Bolt
Assemblies
To prevent the appliance from severe
vibration and breakage, remove transit
bolts and retainers.
1
Starting with the bottom two transit
bolts
A
, use the spanner (included) to
fully loosen all transit bolts by turning
them counterclockwise.
2
Remove the bolt assemblies by
wiggling them slightly while pulling
them out.
3
Install the hole caps.
global_main.book.book Page 66 Sunday, October 16, 2022 3:39 PM
Loading ...
Loading ...
Loading ...