Loading ...
Loading ...
Loading ...
24
Adding Detergents and Softeners
• Do not try to fill the compartments
too quickly. Add detergent and
softener slowly to avoid overflows.
4
After filling the compartments, insert
the lids and turn them clockwise until
they are tightly closed.
• Securely close the lids to the
ezDispense
compartments to
minimize airflow which can harden
these additives and prevent them
from dispensing properly. Be
careful not to lose the lids.
5
Close the dispenser drawer slowly
before starting the cycle.
• Slamming the drawer closed may
result in the detergent overflowing
into another compartment or
dispensing into the drum earlier
than programmed.
• Be careful not to get a hand caught
in the drawer while closing.
• It is normal for a small amount of
water to remain in the manual
dispenser compartments at the end
of the cycle.
CAUTION
• Close lid and cover of the
compartment securely before use. If
not, the detergent and softner will
harden or overflow.
• Slide the detergent dispenser drawer
out or in slowly and use both hands for
safety. Failure to do so can damage the
washer or cause the detergent or
softener to leak out of the ventilation
holes.
• Detergent or fabric softener left in the
ezDispense
compartments for an
extended period may harden and fail
to dispense properly.
• Do not remove the dispenser drawer
while the product is in operation.
• Remove detergent/softener in the
ezDispense
compartments before
moving or relocating the the washing
machine.
• Keep the
ezDispense
compartment
level to prevent contents from leaking.
global_main.book.book Page 24 Sunday, October 16, 2022 3:39 PM
Loading ...
Loading ...
Loading ...