Loading ...
Loading ...
Loading ...
57
Before Calling for Service
Appliance does
not operate.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset
breaker. The appliance should be on a dedicated branch
circuit. The appliance will resume the programme where it
stopped once power is restored.
Appliance does
not operate.
Control needs to be reset.
• Press the
Power
button, then reselect the desired
programme and press the
Start/Pause
button.
Start/Pause was not pressed after a programme was set.
• Press the
Power
button, then reselect the desired
programme and press the
Start/Pause
button. The
appliance is turned off if the
Start/Pause
button is not
pressed within a certain time.
Extremely low water pressure.
• Check another tap in the house to make sure that
household water pressure is adequate.
Appliance is heating the water or making steam.
• The drum may stop operating temporarily during certain
cycles, while water is safely heated to a set temperature.
Appliance stops
for a few minutes
and then restarts.
A motor protection device has been activated to prevent
overheating of the motor.
• This is normal. If the motor protection device is activated,
the appliance will stop for a few minutes and then start
again.
Buttons may not
function properly.
The Child Lock option is activated.
• Deactivate the
Child Lock
option if necessary.
Door does not
open.
The door cannot be opened for safety reasons once the
appliance starts.
• This is normal. You can safely open the door after
H
turns
off.
Appliance is not
filling properly.
Inlet filter clogged.
• Make sure the inlet filters on the fill valves are not clogged.
Inlet hoses may be kinked.
• Check that inlet hoses are not kinked or clogged.
Symptoms Possible Cause & Solution
global_main.book.book Page 57 Sunday, October 16, 2022 3:39 PM
Loading ...
Loading ...
Loading ...