Loading ...
Loading ...
Loading ...
52
Before Calling for Service
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables
contain possible causes and notes for resolving an error message or malfunction. It
is recommended to read the tables carefully below in order to save your time and
money that may cost for calling to LG Electronics service centre.
Befor e Calling fo r Serv ice
Your appliance is equipped with an automatic error-monitoring system to detect and
diagnose problems at an early stage. If the appliance does not function properly or
does not function at all, check the following tables before calling to LG Electronics
service centre.
Error Messages
Symptoms Possible Cause & Solution
1E
INLET ERROR
Water supply is not adequate in that location. Water does
not enter appliance or it enters slowly.
• Check another tap in the house.
Water supply tap is not completely open. Water does not
enter the appliance or it enters slowly.
• Open fully tap.
Water supply hose(s) are kinked.
• Straighten hose or reinstall the water inlet hose.
The filter of the supply hose(s) are clogged.
• Check and clean the inlet valve filter after turning off the
taps and removing the hose connections to the washing
machine.
UE
UNBALANCE
ERROR
The appliance has a system which detects and corrects
the unbalance of the appliance.
• The clothes may be too wet at the end of the cycle,
rearrange the load to allow proper spinning. Close the door
and press
Start/Pause
button. It may take a few moments
before the appliance begins to spin. The door must be
locked before spin can be achieved.
global_main.book.book Page 52 Sunday, October 16, 2022 3:39 PM
Loading ...
Loading ...
Loading ...