Loading ...
Loading ...
Loading ...
16
17
The descale programme automatically performs a series
of rinses and pauses to remove the limescale.
It is normal for several minutes of inactivity to elapse
between rinses.
After about 30 minutes, the water tank is empty and the
and lights ash. Turn the steam dial clockwise as far as it
will go to the 0 position.
The appliance is now ready for rinsing through with clean
water.
7. Empty the container used to collect the descaler solution
and replace it empty under the cappuccino maker.
8. Remove the water tank, empty, rinse under running
water, ll with clean water and replace. The light
ashes.
9. Turn the steam dial anticlockwise to the I position (g. 5).
Hot water comes out of the spout.
10. When the water tank is completely empty, the light
ashes.
11. Turn the dial to the 0 position. The light goes
o.
Fill the water tank again and the machine is ready for use.
SETTING WATER HARDNESS
Descaling is necessary after a period of operation established
according to the water hardness set.
The machine is factory set for a hardness value of 4.
The machine can also be programmed according to the
hardness of the mains water in the various regions so that the
machine needs to be descaled less often.
Measuring water hardness
1. Remove the “TOTAL HARDNESS TEST” indicator paper
attached to this manual from its pack.
2. Immerse the paper completely in a glass of water for one
second.
3. Remove the paper from the water and shake lightly.
After about a minute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the water. Each square
corresponds to one level.
Level 1
Level 2
Level3
Level 4
Set water hardness
1. Make sure the appliance is o (but connected to the
mains electricity supply and with the main switch in the I
position);
2. Press the button and hold it down for at least
6 seconds. The and lights come on
together;
3. Press the button (on the left of the dial) to set the
actual water hardness as measured by the indicator
paper.
Level Level Level Level
1 234
4. Press the button (on the right of the dial) to
conrm the selection.
The machine is now reprogrammed with the new water
hardness setting.
TECHNICAL SPECIFICATION
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1450W
Pressure: 15 bars
Water tank capacity: 1.8 litres max.
Size LxHxD: 238x340x430 mm
Cable length: 1.15 m
Weight: 9.1 kg
Coee beans container capacity: 250 g max.
The appliance complies with the following EC
directives:
• Stand-byDirectiveno.1275/2008;
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments
• Materialsandaccessoriescomingintocontactwithfood
conform to EEC regulation 1935/2004.
DISPOSAL
Important information for correct disposal of the
product in accordance with EC Directive 2002/96/
EC.
At the end of its working life, the product must not
be disposed of as urban waste. It must be taken to
a special local authority dierentiated waste collection centre
or to a dealer providing this service. Disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain signicant savings in energy and resources.As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
Loading ...
Loading ...
Loading ...