Loading ...
Loading ...
2
Open-package Inspection
Open the package box and take out the meter, check carefully
if the following accessories are absent or damaged. If there
is any absence or damage, please contact the distributor
immediately.
Digital multimeter 1 PC
User’s manual 1 copy
Test leads 1 pair
Temperature Probe (K-Thermocouple) 1 PC
Test socket 1 pc
Safety Note
The design of this meter is accordance with IEC1010 clause (the
safety standard issued by International Electro technical
Commission). Prior to the operation of the instrument, please
read the safety considerations before use.
1. When DC voltage above 30V, AC voltage above 25V, current
above 10mA, AC power line with inductive load or power line
during electric fluctuation is measured, please beware of
electric shock.
2. Prior to measurement, check if the measurement function
switch is at the correct position. Check if the test lead is
contacted reliably, connected correctly, and grounded well
and etc. in order to avoid electric shock.
3. Only if the meter is used with the matched test lead, will it
can of the test lead is damaged, it is necessary to replace
with another one of the same model or the same electrical
specification.
4. Don’t use other unconfirmed or disapproved fuse to replace
the fuse inside the meter. Only the same model or same
specification fuse can be replaced. Before the replacement,
the test leads must be removed from the measuring point to
ensure there is no longer any signal at the input terminal.
Loading ...
Loading ...
Loading ...