Loading ...
Loading ...
Loading ...
focusrite.com Tell the world 14
Manual gain adjustment
On Vocaster One, the large knob
marked sets the microphone
gain, and the level to your recording
software.
The gain knob is surrounded by two
LED ‘halo’ indicators, shaped as arcs.
These light in various colours to show
the microphone signal level.
When you’re adjusting the gain by
turning the knob, the left halo changes
to white to show the gain setting.
48V
Good Level A bit too high
Your recording
will distort
To set your gain, speak into your
microphone as if you were recording,
adjust the gain knob until the halo(s)
just start to turn amber when you speak
at your loudest. At this point, turn the
knob down a bit until you don’t see
any amber. If the halos ever turn red,
you will denitely need to turn the gain
knob down: red means your recording is
likely to distort. (See diagrams below.)
You can also adjust the gain from
Vocaster Hub by moving the on-screen
Mic Level slider: drag it to the right to
increase the gain.
EXAMPLES OF USE
Loading ...
Loading ...
Loading ...