Loading ...
Loading ...
Loading ...
14. Press “ENTER” to go to the Print Option Screen. The tester will ask if you would
like to PRINT RESULT? Scroll to your preferred choice and press “ENTER”. If
you chose YES, the printer will print results. If you chose NO, the tester will once
again return you to the Home Screen and once again display the battery’s open
circuit voltage.
15. Turn engine OFF and remove the test leads from the battery posts after
completion of testing, always removing the negative clamp first and then the
positive clamp.
Counter Function
The tester is equipped with a counter function that allows you to track the number
of tests performed over time. The counter can be accessed through the
Configuration Screen. From the Home Screen, scroll down to CONFIGURATION
and press “ENTER” to go to the Configuration Screen. To access the counter, scroll
to COUNTER and press “ENTER”. The tester will show the counter display, listing
the number of battery tests and the number of system tests that have been
performed since the unit was first configured or last reset.
From the counter display, press “ENTER” to achieve the following next steps: return
to the Home Screen, reset the counter or print the counter result. The first choice
shown will be RETURN TO BATTERY TEST. Selecting this option will return you to
the Home Screen.
Scrolling forward once will bring you to RESET. Press “ENTER” to see your reset
options, NO or YES. Scroll to your desired outcome and press “ENTER”. If you
chose to reset the counter, the display will return to the counter display and show
zero tests preformed. If you choose NO, the display will proceed to the Home
Screen.
Scrolling forward twice will bring you to the print screen for the counter display.
Loading ...
Loading ...
Loading ...