Loading ...
Loading ...
Loading ...
• Only use original replacement parts. These meet the required
safety specifications.
• Please note that the appliance must not be mounted tilted or
upended. The design of the appliance includes an oil-containing
pump. Please refer to the installation instructions.
• The manufacturer cannot be held liable for any damage resulting
from failure to follow the safety instructions and warnings.
Electrical connection
• This appliance is manufactured in Class I; this means the device
must be grounded.
• For AU/NZS: Means providing full disconnection under
overvoltage category III conditions must be incorporated in the
fixed wiring in accordance with AS/NZS 3000.
• Check whether the power of the electrical mains corresponds to
the power on the identification plate on the appliance.
• Before connecting to the electrical mains, check whether the
power socket is grounded.
• The device is equipped with a plug. When installing the appliance,
remember that this plug must remain accessible.
WARNING!
If a stationary appliance is not fitted with a supply cord and a plug,
or with other means for disconnection from the supply mains having
a contact separation in all poles that provide full disconnection
under overvoltage category III conditions, the means for
disconnection must be incorporated in the fixed wiring in
accordance with the wiring rules. This is also applicable for
appliances with a supply cord and plug when the plug is not
accessible after installing the appliance. Using an omnipolar switch
with a contact separation of at least 3 mm fitted in the fixed wiring
will fulfil this requirement.
This warming drawer is designed for use by individuals in their home.
It is only intended for pre-warming tableware, keeping food warm
24
Installation
Loading ...
Loading ...
Loading ...