Loading ...
Loading ...
Loading ...
The following is a list of faults that the user can quickly remedy after following the described solution.
Call the service division if another fault is displayed, or the defect cannot be fixed.
Troubleshooting table
SolutionPossible causeProblem
Switch the appliance on.The appliance is not switched
on.
The dish remains cold.
Replace the fuse or switch on
the fuse again in the fuse box.
An interruption in the power
supply.
Close the drawer.The drawer is not closed
properly.
Lengthen the warming duration.Warming duration too short.The dish isn't warm enough.
Select a higher temperature
setting.
Temperature is not set high
enough.
Deactivate delayed start mode.The delayed start is activated.The control lamp flashes
regularly (with the drawer
closed).
Close the drawer and then
select operation with a delayed
start. Touch the on/off-key to
end the delayed start.
The delayed start is activated.The control lamp flashes rapidly
(with the drawer opened).
Contact the service department.Control lamp is defective.
Deactivate Sabbath mode.The Sabbath mode is activated.The control lamp does not
illuminate when the drawer is in
operation.
Touch the on/off-key.Drawer is still in operation.The control lamp flashes rapidly
(with the drawer openend or
closed).
Deactivate Sabbath mode.The Sabbath mode is activated.The operating panel shows no
reaction when touched.
Contact the service department.The control panel is defective.
Contact the service department.Push-pull mechanism is
defective.
The drawer cannot be
opened/closed.
21
Troubleshooting
Loading ...
Loading ...
Loading ...