Loading ...
Loading ...
Loading ...
Safety
• This appliance should only be connected by a registered installer!
• The electrical connection must comply with national and local
regulations.
• The wall plug socket and plug should always be accessible.
• If the power cord is damaged, it should be replaced by the
manufacturer or an authorised service technician, in order to avoid
hazard.
• If you want to make a fixed connection, make sure that a omnipolar
switch with a contact separation of at least 3 mm is fitted in the
supply cable.
• If a stationary appliance is not fitted with a supply cord and a
plug, or with other means for disconnection from the supply mains
having a contact separation in all poles that provide full
disconnection under overvoltage category III conditions, the
instructions shall state that means for disconnection must be
incorporated in the fixed wiring in accordance with the wiring
rules.
• WARNING: Never open the appliance casing. The casing may
only be opened by a service technician.
• Prior to connecting the drawer, ensure that all cables in your
home’s electrical system are of sufficient diameter to supply the
appliance properly.
• Complete all electrical connections before building in the
appliance.
• Improper installation and maintenance work or repairs are
dangerous. These may only be performed by authorized and
trained technicians. If the appliance has a defect, please
disconnect it and contact customer service.
• If the appliance is mounted behind a furniture front (e.g. a door),
never close it while the appliance is in use. Heat and humidity
accumulate behind a closed furniture front. This may damage
drawer, cupboard and floor.
23
Installation
Loading ...
Loading ...
Loading ...