Loading ...
Loading ...
Loading ...
USB
If your Ultimatte has a USB connector on the front panel, you can use this
port to connect the unit to your computer. This USB-C port is used for
updating and configuring the unit with Blackmagic Ultimatte Setup. On larger
Ultimatte models the USB-C port is on the rear panel.
Quick Preset Buttons
The three numbered buttons on the front panel are used to recall quick presets. If a quick
preset is available the corresponding button is illuminated green, when a quick preset is active
the button will be blue.
For more information, refer to the ‘presets’ section later in this manual.
Menu
Press the ‘menu’ button to open and close the settings menu.
Lock
Press and hold the ‘lock’ button for 1 second to lock the front panel. This disables the buttons,
preventing anyone from accidentally changing any settings. The button will illuminate red
when active.
Press and hold for 2 seconds to unlock the panel.
LCD Menu Settings
All the settings for your Ultimatte are located under the main ‘setup’ page. Simply scroll through
the setup menu to find the settings you need to change. These include network and matte
settings, checking the status of connected inputs, appearance settings and resetting the unit to
factory settings.
Press the ‘menu’ button on the front panel to open the menu settings.
2
1 MENU
SET
3 LOCK
17LCD Menu Settings
Loading ...
Loading ...
Loading ...