Loading ...
Loading ...
Loading ...
Black Level
The Black Level feature adjusts the reference level of black in the
video signal to one of two choices:
• Low. Standard NTSC black level. Yields consistent contrast
through all sources,
• High. Enhanced black level, for increased contrast during DVD
playback.
1 Open "SETUP MENU"
With the DVD in stop mode, press the SETUP button.
2 Select "DVD"
Usingthe up/down and left/righl buttons,move the selectioncursor
to "DVD Setup," then press ENTER to select.
3 Set "Display Options"
Move the selection bar to "Display Options', then press ENTER to
select.
4 Set "Black Level"
Move the selection bar to "Black Level," then press right to select
from the following options:
• Low - Standard NTSC reference Black Level for consistent
brightness/contrast across all sources.
• High - Enhanced Black Level for increasedbrightness/contrast
when viewing DVDs.
AIt Video Out
If you connected your DVD-VCR to your television using the
S-VIDEO OUT or COMPONENT VIDEO OUT jacks, you MUST set
the "AIt (alternative) Video Out" selection in the on-screen menu
system.
• TheS-VideoorComponent Videoconnectionisonlyforthe
DVD player. The tuner and VCR will still be viewed through the
RE or line outputs.
I Open "SETUP MENU"
With the OVD in stopmode. press the SETUP button.
2 Select "DVD"
Using the up/down and le_right buttons, move the selectioncursor
to "DVD Setup," then press ENTER to select,
3 Set "Display Options"
Move the selectionbar to "Display Options",then press ENTER to
select.
4 Select "Alt Video Out"
Move lhe selectionbar to "AItVideo Out," then press right to
se_eclfrom the followingoptions:
• S-Video - Indicatesthat you are using the S-VIDEO OUT jack on
the rear panel to connect Io your TV.
• Component- Indicatesthat you are using the COMPONENT
VIDEO OUT jacks on the rear panel to connect _oyour TV.
Dmm
Loading ...
Loading ...
Loading ...