Loading ...
Loading ...
Loading ...
6
Parts of the System
= W
ater purification system assembly
= Water supply fitting
= F
iltered water faucet for sink or countertop mounting
= C
olor coded 3/8" tubing to make all needed connections
= F
ilter change drip tray
Typical Undersink Installation
Locate the water purification system on the cold water supply pipe, under the kitchen and/or bathroom
sink, to filter the cold drinking water. Refer to the following drawing.
filtered water
faucet
Yellow Tubing
WATER IN
FIG. 2
Blue Tubing
WATER OUT
Blue Tubing
WATER OUT
Materials and Tools Needed
NOTE: Gather the required tools before starting installation. Read and
follow the instructions provided with any tools listed here.
= Slotted and Phillips screwdrivers
= Pliers and adjustable jaw wrench
= Tubing cutter
= Electric drill and 1-1/4" drill bit if mounting hole is needed for the faucet
IMPORTANT: To avoid damaging the sink, consult a qualified plumber or
installer for drilling procedures in porcelain or stainless steel.
IMPORTANT: Allow adequate open space
behind the water purification
system to avoid sharp bends
or kinks in the tubing.
shutoff valve
water supply
fitting
SINK
HOT COLD
filter change
drip tray
Loading ...
Loading ...
Loading ...