Manufactured by
Water Channel Partners
1890 Woodlane Drive
Woodbury, MN 55125
How to install, operate and
maintain your Triple Stage
Water Purification System
Model BRDWPS
Installation and Operation Manual
System tested and certified by NSF International
against NSF/ANSI Standards 42 and 53 for the
performance claims listed on pages 3 and 4.
The WHAMBS5 system is certified by
NSF International against NSF Protocol P231
for Microbiological Water Purifiers, based on
the recommmendations set forth in the
U.S. EPA Guide Standard and Protocol for
Testing Microbiological Water Purifiers
(OPP Task Force Report, 1987).
If you have any questions or concerns when
installing, operating or maintaining your water
purification system, call our toll free number:
1-800-218-6172
or visit www.ecopurehome.com/brita
When you call, please be prepared to provide
the model number and date code of your
product, found on the rating decal on back.
7379604 (Rev. C 5/26/20)
PRODUCT AND WARRANTY
REGISTRATION
Register your product
online to validate and
extend your warranty.
See warranty page for
details.
warranty.ecopurehome.com/brita
2
TABLE OF CONTENTS
Page
S
pecifications & Performance Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
What the Water Purification System will Do / Before You Start / Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts of the System / Materials & Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
F
ilter Cartridge Life & Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Troubleshooting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
P
arts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
WARRANTY
TRIPLE STAGE DRINKING WATER PURIFICATION SYSTEM - MODEL BRDWPS
(not including filter cartridges)
Warrantor: Water Channel Partners, 1890 Woodlane Drive, Woodbury, MN 55125
One Year Warranty:
Warrantor guarantees, to the original owner, that the Triple Stage Drinking Water Purification System (BRDWPS), when
installed and maintained in accordance with the instructions, will be free from defects in materials and workmanship for a
period of one (1) year from the date of purchase.
Lifetime Warranty:
Warrantor guarantees, to the original owner only, that the Triple Stage Drinking Water Purification System (BRDWPS) will
be free from defects in materials and workmanship for the lifetime of the owner, provided that:
● The system is installed and maintained in accordance with the instructions in the same home where it was originally
installed.
● The owner replaces all three (3) filters every six (6) months and saves their receipts, for proof of purchase of the Brita
BRDWPF filter cartridge set, in case a warranty claim is made. Purchase of no more than two (2) BRDWPF filter sets
in a 12 month period may be applied toward compliance with this warranty.
Failure to adhere to the above requirements from the date of purchase voids the lifetime warranty.
If, during such respective periods, a part proves, after inspection, to be defective, Warrantor will, at its sole option, either
replace or repair the part without charge except normal shipping and installation charges. Labor to maintain the equipment
is not part of the warranty. Filters, which are expendable, are not covered by the warranty.
TO OBTAIN WARRANTY PARTS, SIMPLY CALL 1-800-218-6172 for assistance. This warranty applies only while this
product is in use in the United States.
General Provisions
The above warranties are effective provided the Triple Stage Drinking Water Purification System is operated at water pres-
sures not exceeding 100 psi, and at water temperatures not exceeding 100°F; provided further that the Triple Stage
Drinking Water Purification System is not subject to abuse, misuse, alteration, neglect, freezing, accident or negligence;
and provided further that the Triple Stage Drinking Water Purification System is not damaged as the result of any unusual
force of nature such as, but not limited to, flood, hurricane, tornado or earthquake.
Warrantor is excused if failure to perform its warranty obligations is the result of strikes, government regulation, materials
shortages, or other circumstances beyond its control.
THERE ARE NO WARRANTIES ON THE TRIPLE STAGE DRINKING WATER PURIFICATION SYSTEM BEYOND
THOSE SPECIFICALLY DESCRIBED ABOVE. ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED TO THE EXTENT
THEY MIGHT EXTEND BEYOND THE ABOVE PERIODS. THE SOLE OBLIGATION OF WARRANTOR UNDER THESE
WARRANTIES IS TO REPLACE OR REPAIR THE COMPONENT OR PART WHICH PROVES TO BE DEFECTIVE
WITHIN THE SPECIFIED TIME PERIOD, AND WARRANTOR IS NOT LIABLE FOR CONSEQUENTIAL OR INCIDEN-
TAL DAMAGES. NO WARRANTOR DEALER, AGENT, REPRESENTATIVE, OR OTHER PERSON IS AUTHORIZED TO
EXTEND OR EXPAND THE WARRANTIES EXPRESSLY DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts or exclusions or limitations of incidental or con-
sequential damage, so the limitations and exclusions in this warranty may not apply to you. This warranty gives you spe-
cific legal rights, and you may have other rights which vary from state to state. This warranty applies to consumer-owned
installations only.
EXTEND YOUR WARRANTY:
You can turn your water purification system’s one year factory warranty into a lifetime warranty by registering the
system at warranty.ecopurehome.com/brita and saving your receipts for purchases of Brita replacement filter
cartridges. See “Lifetime Warranty” below for details.
3
Specifications & Performance Claims
This system conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substantiated by
test data. This system conforms to NSF Protocol P231 for Microbiological Water Purifiers.
This system improves the taste and odor and reduces many chemical contaminants in drinking water.
This system has been tested according to NSF/ANSI 42 and 53 for the reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less
than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42 and 53. The testing
was performed using spiked tap water at a flow rate of 0.74 GPM (2.8 L/min.), pH of 7.5 ±0.5, pressure of 60 PSIG,
and temperature of 68 ±5°F.
IMPORTANT NOTICE: Read this performance data and compare the capabilities of this unit with your actual water
treatment needs. It is recommended that, before purchasing a water treatment unit, you have your water supply
tested to determine your actual water treatment needs. This system is designed to be used for the reduction of the
performance claims listed below. Do not use for the treatment of water that is visually contaminated (cloudy) or has
an obvious contamination source, such as contamination by raw sewage. This system is not intended to convert
waste water or raw sewage into drinking water. Systems certified for cyst reduction may be used on disinfected
water that may contain filterable cysts. While testing was performed under standard laboratory conditions, actual
performance of the system may vary based on local water conditions. Some or all of the contaminants reduced by
this unit may not be in your water supply. See elsewhere in this manual for instructions on filter cartridge
replacement, system installation, operating procedures, and warranty. The maintenance instructions must
be followed for the product to perform as indicated below.
NOTE: See labels on the water treatment system for additional information.
SPECIFICATIONS
Supply Water Pressure Min. - Max. 30 - 100 psi (207 - 689 kPa)
Supply Water Temperature Min. - Max. 40 - 100 °F (4 - 38 °C)
Rated Service Flow 0.74 gallons per minute (2.8 liters per minute)
Filter Service Life 350 gallons (1,325 liters)
Inlet - Outlet 3/8" quick connect fittings
Maximum Supply Water Iron, Manganese & Hydrogen Sulfide 0
PERFORMANCE CLAIMS
Contaminant
Required
Influent
Level (μg/L)
k
NSF Max. Per -
missible Effl.
Level (μg/L)
k
Average
Influent
Level (μg/L)
k
Avg. / Max.
Effluent
Level (μg/L)
k
Avg. / Min.
Percent
Removal
EPA
j
Max.
Contaminant
Level (μg/L)
k
Lead @ pH 6.5 150 ±10% 10 160 1.1 / 5.2 99.3 / 96.8 15
Lead @ pH 8.5 150 ±10% 10 150 1.2 / 3.5 99.2 / 97.7 15
Substance
Chlorine
Taste & Odor
2000 ±10% 50%
l
1,900 50 / 60 97.4 / 96.9 None
m
Particulate, Class I
n
(0.5 to <1 micron)
10,000
n
85%
l
6,800,000
n
10,200 /18,000
n
99.9 / 99.9 None
m
VOC Reduction
o
Chloroform 300 ±10% 95%
l
330 1.9 / 11 98.0 / 96.7 15
j
Environmental Protection Agency maximum contaminant level as required under the Safe Drinking Water Act.
k
Micrograms per liter, which is equivalent to parts per billion (PPB).
l
NSF minimum percent reduction requirement. Acceptance level for this substance is based on percent reduction,
rather than maximum effluent concentration.
m
The EPA has not determined a maximum contaminant level for this chemical.
n
Particulate Class I, reported in particles per milliliter.
o
Chloroform was used as a surrogate for the reduction of chemicals specified in the Organic Chemicals Reduced
by Chloroform Surrogate Testing table (on the following page).
4
C
ontaminant
Average
j
I
nfluent
(μg/L)
k
Maximum
E
ffluent
(μg/L)
k
Percent
Removal
EPA
M
CL
p
(μg/L)
k
Alachlor 50 1.0
l
>98 2.0
A
trazine 100 3.0
l
>
97 3.0
Benzene 81 1.0
l
99 5.0
Carbofuran 190 1.0
l
>99 40
Carbon Tetrachloride 78 1.8
m
98 5.0
Chlorobenzene 77 1.0
l
99 100
Chloropicrin 15 0.2
m
99 NA
2,4-D 110 1.7
m
98 70
Dibromochloropropane
(DBCP)
52 0.02
l
>99 0.2
o-Dichlorobenzene 80 1.0
l
99 600
p-Dichlorobenzene 40 1.0
l
98 75
1,2-Dichloroethane 88 4.8
n
95
n
5.0
1,1-Dichloroethylene 83 1.0
l
99 7.0
cis-1,2-
Dichloroethylene
170 0.5
l
>99 70
trans-1,2-
Dichloroethylene
86 1.0
l
99 100
1,2-Dichloropropane 80 1.0
l
99 5.0
cis-1,3-
Dichloropropylene
79 1.0
l
99 NA
Dinoseb 170 0.2
m
99 7.0
Endrin 53 0.59
m
99 2.0
Ethylbenzene 88 1.0
l
99 700
Ethylene Dibromide
(EDB)
44 0.02
l
>99 0.05
Haloacetonitriles (HAN):
Bromochloroacteonitrile
22 0.5
m
98 NA
Dibromoacetonitrile 24 0.6
m
98 NA
Dichloroacetonitrile 9.6 0.2
m
98 NA
Trichloroacetonitrile 15 0.3
m
98 NA
ORGANIC CHEMICALS REDUCED BY CHLOROFORM SURROGATE TESTING
C
ontaminant
Average
j
I
nfluent
(μg/L)
k
Maximum
E
ffluent
(μg/L)
k
Percent
Removal
EPA
M
CL
p
(μg/L)
k
H
aloketones (HK):
1,1-Dichloro-2-
propanone
7.2 0.1
m
99 NA
1,1,1-Trichloro-2-
p
ropanone
8.2
o
0.3
m
96 NA
Heptachlor 25 0.01
l
>99 0.4
Heptachlor Epoxide 10.7
o
0.2
o
98 0.2
Hexachlorobutadiene 44 1.0
l
98 NA
Hexachlorocyclopenta-
diene
60 0.002
l
>99 50
Lindane 55 0.01
l
>99 0.2
Methoxychlor 50 0.1
l
>99 40
Pentachlorophenol 96 1.0
l
99 1.0
Simazine 120 4.0
l
97 4.0
Styrene 150 0.5
l
>99 100
1,1,2,2-Tetrachloroethane
81 1.0
l
99 NA
Tetrachloroethylene 81 1.0
l
99 5.0
Toluene 78 1.0
l
99 1,000
2,4,5-TP (Silvex) 270 1.6
l
99 50
Tribromoacetic Acid 42 1.0
l
98 NA
1,2,4-Trichlorobenzene 160 0.5
l
>99 70
1,1,1-Trichloroethane 84 4.6
m
95 200
1,1,2-Trichloroethane 150 0.5
l
>99 5.0
Trichloroethylene 180 1.0
l
>99 5.0
Trihalomethanes (incl.):
300 15 95 80
Chloroform
(surrogate chemical)
Bromoform
Bromodichloromethane
Chlorodibromomethane
Xylenes (total) 70 1.0
l
99 10,000
j
Influent challenge levels are average influent concentrations determined in surrogate qualification testing.
k
Micrograms per liter, which is equivalent to parts per billion (PPB).
l
Maximum product water level was not observed, but set at the detection limit of the analysis.
m
Maximum product water level set at a value determined in surrogate qualification testing.
n
Chemical reduction percent and maximum product water level calculated at chloroform 95% breakthrough point,
as determined in surrogate qualification testing.
o
The surrogate test results for Heptachlor Epoxide demonstrated a 98% reduction. These data were used to cal-
culate an upper occurrence concentration, which would produce a maximum product water level at the MCL.
p
Environmental Protection Agency maximum contaminant level as required under the Safe Drinking Water Act.
Performance Claims (continued)
Substance Log Reduction %Reduction
Cyst 3.5 99.95
Virus 4 99.99
Bacteria 6 99.9999
Cyst, virus and bacteria reduction tested by BioVir
Labs, in accordance with the U.S. EPA test protocol.
10"
14-1/4" 4-1/2"
5
Before You Start
Dimensions
10”
4-1/2”
14-1/4”
q Read all steps and guides carefully before installing and using your water purification system. Follow
all steps exactly to correctly install. Reading this manual will also help you to get all the benefits from
the water purification system.
q Do not use for the treatment of water that is visually contaminated (cloudy) or has an obvious contami-
nation source, such as contamination by raw sewage.
q All plumbing should be done in accordance with local codes and requirements. In Massachusetts,
plumbing code 248 CMR 3.00 and 10.00 shall be adhered to. Consult with your licensed plumber.
q The water purification system works on water pressures of 30 psi (minimum) to 100 psi (maximum). If
your house water pressure is over the maximum, install a pressure reducing valve in the water supply
pipe to the water purification system.
q Do not install the water purification system outside, or in extreme hot or cold temperatures.
Temperature of the water supply to the water purification system must be between 40°F and 100°F. Do
not install on hot water.
What the Water Purification System will Do
T
he BRDWPS is a water purification treatment system. This system uses a triple filter configuration to
remove undesirable elements in your water. These elements may include chlorine taste and odor, particu-
l
ates, lead, virus, bacteria, cysts, and many organic compounds. At the same time, the system allows the
minerals found in water to remain, for great tasting water.
The BRDWPS utilizes patented technology to ensure a safe water supply for the user. Replace all filters
e
very 6 months or 350 gallons. The purifier technology is designed to stop flowing when its capability to
protect the user has been exhausted. This one-of-a-kind failsafe technology ensures that the user will not
be exposed to contaminated water.
NOTE: A performance data sheet is included listing what the system will reduce from the water supply.
See the performance data sheet for individual contaminants and microbial reduction performance.
The water purification system fits under the kitchen or bathroom sink. However, you can install it where it
is most convenient. You need a COLD water supply pipe within a few feet (6 feet of tubing is included).
You can purchase longer lengths of tubing if needed to reach more distant points. Be sure tubing is
acceptable for use on potable water supplies.
FIG. 1
Questions? Call Toll Free 1-800-218-6172 or visit www.ecopurehome.com/brita
When you call, please be prepared to provide the model number and date code,
found on the rating decal on back.
6
Parts of the System
= W
ater purification system assembly
= Water supply fitting
= F
iltered water faucet for sink or countertop mounting
= C
olor coded 3/8" tubing to make all needed connections
= F
ilter change drip tray
Typical Undersink Installation
Locate the water purification system on the cold water supply pipe, under the kitchen and/or bathroom
sink, to filter the cold drinking water. Refer to the following drawing.
filtered water
faucet
Yellow Tubing
WATER IN
FIG. 2
Blue Tubing
WATER OUT
Blue Tubing
WATER OUT
Materials and Tools Needed
NOTE: Gather the required tools before starting installation. Read and
follow the instructions provided with any tools listed here.
= Slotted and Phillips screwdrivers
= Pliers and adjustable jaw wrench
= Tubing cutter
= Electric drill and 1-1/4" drill bit if mounting hole is needed for the faucet
IMPORTANT: To avoid damaging the sink, consult a qualified plumber or
installer for drilling procedures in porcelain or stainless steel.
IMPORTANT: Allow adequate open space
behind the water purification
system to avoid sharp bends
or kinks in the tubing.
shutoff valve
water supply
fitting
SINK
HOT COLD
filter change
drip tray
7
Installation Instructions
Step A - Install Cold Water Supply Fitting
Step B - Make Hole For Filtered Water Faucet
IMPORTANT: To avoid damaging the sink, consult a qualified plumber or installer for drilling procedures
in porcelain, stainless steel or granite. Special drill bits are made for this.
1. Select one of the following places to install the faucet. Be sure there is room underneath so you can
make the needed connections.
= In an existing sink spray attachment hole.
= Drill a hole in the sink top.
= Drill a hole in the countertop next to the sink.
2. If drilling is needed make a 1-1/4" dia. (minimum) hole for the faucet.
A. Water supply connection
(using included water supply fitting)
B. Water supply typical connection
(using compression fitting)
- parts not provided -
cold water shutoff
3/8" compression fitting
insert
ferrule
cold water
pipe
3/8" tubing to water
purification system inlet
cold water shutoff
cold water
shutoff
3/8" tubing to water
purification system inlet
cold water
line
water supply
fitting
FIG. 3
Check and comply with local plumbing codes as you plan, then install a cold water supply fitting. The fit-
ting must provide a leak-tight connection to the water purification system 3/8" tubing. A typical connec-
tion using the included water supply fitting is shown in Figure 3A. An optional connection using standard
plumbing fittings (not included) is shown in Figure 3B.
Included Water Supply Fitting
1. Close the cold water shutoff valve (angle stop valve) that the water supply fitting will be installed on,
and open faucet(s) to relieve pressure.
2. Disconnect the existing cold water line from the water shutoff valve.
3. Make sure that the water supply fitting’s gasket is inside the female threaded portion of the fitting.
4. Install the water supply fitting onto the cold water shutoff valve, where the existing cold water line was
removed, and hand tighten. Be careful not to cross thread or overtighten.
5. Connect the existing cold water line to the male threaded portion of the water supply fitting and hand
tighten. Be careful not to cross thread or overtighten.
Optional Pipe Fittings (compression type shown)
NOTE: Be sure to turn off the water supply and open a faucet to drain the pipe.
Complying with plumbing codes, install a fitting on the cold water pipe to adapt 3/8" OD tubing. A typical
connection is shown in Figure 3B. If threaded fittings are used, be sure to use pipe joint compound or
thread sealing tape on outside threads.
gasket
8
Installation Instructions
Step C - Install Faucet
1. Locate and organize your filtered water faucet install parts. Refer to Fig. 4.
2
. Assemble the stem onto the faucet body, and screw it firmly into place.
3. Snap the o-ring into the groove on the bottom of the base, and slide the base onto the faucet stud.
4. Feed the faucet stud down into the mounting hole.
5. On the underside of the sink or countertop, install the spacer, flat washer, and hex nut. Slide the large
steel washer into place between the countertop and spacer. Then, tighten the hex nut securely.
6. Thread the quick connect fitting onto the bottom of the faucet stud.
FIG. 4
Step D - Make Tubing Connections
1. Allowing some slack, measure and cut a length of 3/8" tubing to connect between the supply fitting
and the filter system inlet (See Figure 2). Cut the ends of the tubing square.
2. Insert tubing all the way into the supply fitting and inlet fitting. Pull on the tubing to be sure that it's
held firmly in the fittings.
3. Repeat steps 1 and 2 to connect tubing from the faucet to the filter system outlet (See Figure 2).
continued on the next page
Stem
O-ring
Spacer
Hex Nut
Washer
Base
Steel Washer
(large)
1-1/4” dia. Hole
in Sink or
Countertop
Faucet
Body
Quick Connect
Fitting
9
Installation Instructions
Questions? Call Toll Free 1-800-218-6172 or visit www.ecopurehome.com/brita
When you call, please be prepared to provide the model number and date code,
found on the rating decal on back.
To Disconnect Tubing:
1. Push the collet inward and hold with a finger while pulling the tubing out.
tubing
collet (depress to remove tubing)
end of tubing round and smooth,
with no cuts, nicks or flat spots
correct full 3/4" engagement
Tubing correctly cut and connected
Incorrect partial engagement
c
ontinued from the previous page
This system has push-in (quick connect) fittings for all connection locations. When working with the fit-
tings, do the following.
C
onnect Tubing:
1. Use a sharp cutter or knife to cut the end of tubing square.
2. Inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots.
If needed cut the tubing again.
3. Push tubing through the collet and all the way into fitting. Full engagement is 3/4" length of tube into
the fitting.
If tubing other than supplied with the system is used, be sure it is of high quality, exact size and round-
ness with a smooth surface.
FIG. 5
FIG. 6
Step E - Turn On Water, Check for Leaks and Rinse Carbon Fines
1. Open the shutoff valve(s) that you closed at the beginning of this installation.
2. Open the sink faucet and filtered water faucet to purge air from the system. When the water runs
smooth, with no bubbles or spurting, close faucets and check installation for leaks.
3. Open the filtered water faucet and let water run for 10 minutes to rinse out carbon fines.
10
Filter Cartridges
Filter Cartridge Life
Taste and Odor, and Microbiological Purifying Cartridges: Taste and odor, and microbiological
p
urifying cartridges contain activated carbon. When new, open the filtered water faucet and allow fine,
carbon particles to purge from the cartridges. Flush for 10 minutes. It is recommended to replace filter
cartridges every six months or 350 gallons of use. There are several variables that determine how
long a cartridge will last. These include:
1. How much water you use, and
2. How much sediment, taste and/or odor, or other unwanted substance, is in the water.
Use the following information as a guide. However, no matter which type of cartridge you are using, you
will know it is time to replace them when you first notice the return of the unwanted sediment, taste
and/or odor in your water, or when the flow diminishes or stops.
Brita Triple Stage Drinking Water Purification System model BRDWPS with replacement element pack
BRDWPF conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substan-
tiated by test data. The rated capacity for this system is 350 gallons (1,325 liters) at a rated service flow
of 0.74 gallons per minute.
Filter Cartridge Replacement
1. Turn filter cartridge counterclockwise to remove cartridges from the filter manifold.
Note: You may notice some water under the system during filter change.
2. Dispose of the cartridges in a proper manner.
3. Install new cartridges. Turn cartridges clockwise to re-attach to the filter manifold.
Taste and Odor, and Microbiological Purifying Cartridges: Taste and odor, and microbiological puri-
fying cartridges contain activated carbon, a black powder. When new, open the filtered water faucet and
allow fine, carbon particles to purge from the cartridges. Flush for 10 minutes.
Register for reminders to change filters at
www.ecopurehome.com/brita
filter cartridges
Turn filter cartridges
counterclockwise
to remove from manifold
FIG. 7
Turn filter cartridges
clockwise
to attach to manifold
11
Troubleshooting the System
Need help troubleshooting? Call Toll Free 1-800-218-6172 or visit www.ecopurehome.com/brita
Problem: No water or decreased water flow.
Cause: Filter 1 is clogged. Correction: Replace the filter 1 cartridge.
Cause: Flow through the microbiological purifying filter will
decrease and eventually clog when exposed to an
excess of microbiological loading materials in the water.
T
his failsafe feature reduces the chance of product use
beyond its intended life, and will shut down the filter
when it is exposed to contaminated water.
Correction: Replace all filter cartridges.
Problem: Taste and/or Odor.
Cause: Filter cartridges exhausted. Correction: Replace all filter cartridges.
Cause: System contaminated. Correction: Sanitize system. Call 1-800-218-6172
for instructions.
Problem: Water leaks at push connect fittings.
Cause: Tubing not pushed in all the way. Correction: Push tubing in all the way into fittings.
Cause: Tubing not cut square. Correction: Cut tubing square.
Cause: Tubing nicked. Correction: Remove nicked portion, reinsert tubing
into fitting.
Cause: Outer tubing surface not smooth. Correction: Remove rough portion, reinsert tubing
into fitting.
12
Parts List
Key No. Part No. Description
1 7379735 Faucet, Brushed Nickel
2 119-8600088 Water Supply Fitting, 3/8” Q.C.
– 7383158 Repl. Cabinet (incl. Key Nos. 3 & 4)
3
á
Cabinet, Left
4
á
Cabinet, Right
5 7383166
Manifold Assembly
(includes Key Nos. 3-5)
6 BRDWPF
Repl. Filter Cartridges, 1 each of
Sediment, LTO (Lead, Taste & Odor)
& Microbiological Purifying Ù
¢
7168435 Tubing, 3/8” x 72” long, White
¢
7379604 Owner’s Manual
3
6
5
4
FOR IOWA USE ONLY
All sales in Iowa require the following signature before consummation of sale. These signatures must be retained by
seller/renter for 2 years minimum.
Buyer/Renter __________________________________________________________ Date _________________
Seller ________________________________________________________________ Date _________________
Seller’s Address _______________________________________________________________________________
Seller’s Phone No. _____________________________________________________________________________
Product: Brita Triple Stage Drinking Water Purification System - Model BRDWPS
– – – – – – – – – – – – – – – – – – – – – – – – –
"
1
2
Ù Please purchase replacement cartridges from the e-commerce
retailer where you bought your water purification system or
www.ecopurehome.com/brita.
¢ Not illustrated.
To order repair parts visit
www.ecopurehome.com/brita
Manufactured by
Water Channel Partners
1890 Woodlane Drive
Woodbury, MN 55125
1-800-218-6172
