Loading ...
Loading ...
Loading ...
10
Filter Cartridges
Filter Cartridge Life
Taste and Odor, and Microbiological Purifying Cartridges: Taste and odor, and microbiological
p
urifying cartridges contain activated carbon. When new, open the filtered water faucet and allow fine,
carbon particles to purge from the cartridges. Flush for 10 minutes. It is recommended to replace filter
cartridges every six months or 350 gallons of use. There are several variables that determine how
long a cartridge will last. These include:
1. How much water you use, and
2. How much sediment, taste and/or odor, or other unwanted substance, is in the water.
Use the following information as a guide. However, no matter which type of cartridge you are using, you
will know it is time to replace them when you first notice the return of the unwanted sediment, taste
and/or odor in your water, or when the flow diminishes or stops.
Brita Triple Stage Drinking Water Purification System model BRDWPS with replacement element pack
BRDWPF conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substan-
tiated by test data. The rated capacity for this system is 350 gallons (1,325 liters) at a rated service flow
of 0.74 gallons per minute.
Filter Cartridge Replacement
1. Turn filter cartridge counterclockwise to remove cartridges from the filter manifold.
Note: You may notice some water under the system during filter change.
2. Dispose of the cartridges in a proper manner.
3. Install new cartridges. Turn cartridges clockwise to re-attach to the filter manifold.
Taste and Odor, and Microbiological Purifying Cartridges: Taste and odor, and microbiological puri-
fying cartridges contain activated carbon, a black powder. When new, open the filtered water faucet and
allow fine, carbon particles to purge from the cartridges. Flush for 10 minutes.
Register for reminders to change filters at
www.ecopurehome.com/brita
filter cartridges
Turn filter cartridges
counterclockwise
to remove from manifold
FIG. 7
Turn filter cartridges
clockwise
to attach to manifold
Loading ...
Loading ...