Loading ...
Loading ...
Loading ...
17
3. Pull the brake lever to release the lock button of the brake
lever.
4. Loosen the adjusting sleeve and xing nut by turning
them counterclockwise (Fig. 31).
5. Tighten the xing nut only by turning it clockwise (Fig. 32).
6. Loosen the adjusting sleeve located near the terrain wheel
by turning it counterclockwise (Fig. 33).
7. Test the brake by pulling it. The brake should stop halfway
while fully pulled (Fig. 29). If it does, follow step 11.
If it doesn't, follow steps 8-10.
Fig. 31
Fixing nut
Adjusting
sleeve
Fig. 32
Fixing nut
Fig. 33
Adjusting sleeve
8. Loosen the xing nut close to the hand brake by turning it
counterclockwise (Fig. 34).
9. Tighten the xing nut and the adjusting sleeve by turning
them clockwise (Fig. 35).
10. Tighten the adjusting sleeve near the middle wheel by
turning it clockwise (Fig. 36).
11. Fold back the carrier frame, and then reattach the bucket.
Fig. 34
Fixing nut
Fig. 35
Adjusting sleeve
Fixing nut
Fig. 36
Adjusting sleeve
Loading ...
Loading ...
Loading ...