Loading ...
Loading ...
Loading ...
13
Carrier and Bucket Assembly
1. Fit the carrier frame on the base frame in place, make sure
the bolt of the carrier lock is inserted in the opening on the
side of the carrier frame, and the end pole of the carrier
frame is t in the middle of the 2 panels under the base
frame, as shown. (Fig. 14).
NOTE: Pull the lock backwards to insert the carrier
lock bolt in the opening of the carrier frame. You can
turn the lock knob 90 degrees to keep it unlocked while
assembling the carrier frame (Fig. 15).
2. Insert the rotary rod into the aligned holes of the 2 panels
under the base frame and the end of the carrier frame,
and lock the assembly with 2 cotter pins on both sides
(Figs. 16 - 17).
Fig. 14
End Pole
2 Panels
Carrier frame
Carrier lock
Fig. 15
Pull back the lock
Turn the knob to
keep it unlocked
Fig. 16
Rotary rod
3. Fit the bucket onto the carrier frame, making sure the
4 holes on the bottom of the bucket are aligned with
the 4 holes on the carrier frame. Fix the bucket and
carrier assembly with the provided 4 sets of bolts, spring
washers, at washers and wing nuts, as shown. Tighten
securely for a stable assembly (Fig. 18).
Operation
m
WARNING! Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of a
second is sucient to inict serious injury.
mWARNING! Always remove battery pack from the
machine when you are assembling parts, making adjustments,
cleaning, or when not in use. Removing battery pack will
prevent accidental starting that could cause serious personal
injury.
Cotter pins
Fig. 17
Fig. 18
Wing nut
Bolt
Spring washer
Flat washer
Loading ...
Loading ...
Loading ...