Loading ...
Loading ...
Loading ...
33
573104 REV C
Maintenance
Select Oil Viscosity
(N/A for 34788NI-H)
The oil inject functionality in this machine is automatic and
timing-based. The viscosity of the oil being injected signicantly
affects the accuracy.
1. Select SET OIL INJECT VISCOSITY from the SETUP
MENU.
2. Using the arrow keys, highlight the desired PAG oil viscosity
(46, 100, 125, or 150). Select to accept.
The unit is now ready to accurately inject the selected oil.
Edit Print Header
To make changes to text that appears in this screen:
3. Select EDIT PRINT HEADER from the SETUP MENU.
4. The cursor is in the rst eld. Update the text by using the
arrows and the multi-tap interface on the numeric keypad:
• ARROW LEFT and act as a backspace key.
• ARROW RIGHT moves the cursor to the right.
• ZERO (0) key acts as a spacebar.
• ARROW UP and DOWN navigate between the rows.
5. Select to save the changes and return to the Setup
Menu; select to return to the previous header and exit
to the Setup Menu.
Replace Printer Paper
To install a new paper roll in the printer:
1. Remove the cover on the printer by pulling out on the tab
as shown in Figure 12.
2. Remove the paper core.
3. Install the new roll of paper with the end of the paper at
the top of the roll.
4. Assemble the cover onto the printer with the leading edge
of the paper over the roller.
Tab
Leading Edge of
Paper Over Roller
Figure 12
Loading ...
Loading ...
Loading ...