Loading ...
Loading ...
Loading ...
11
573104 REV C
Initial Setup
WARNING: To prevent personal
injury while working with refrigerant,
read and follow the instructions
and warnings in this manual, and
wear protective equipment such as
goggles and gloves.
Unpack the Machine
1. Remove the bandings from the box.
2. Remove the top carton infold, the molded pulp tray, and
the angle boards.
3. Remove the sleeve from the bottom carton infold.
4. Gently roll the unit forward and off the pallet, avoiding
any sudden shocks to the machine.
Unpack the Accessory Kit
Unpack the accessory kit from the box, and remove the
plastic packaging.
Calibration Check
Weight
533 g (1.18 lb)
Pouch containing the user manual, warranty card to be
lled out and mailed, Safety Data Sheets (SDSs), and
service center list.
Power Up the Machine
1. Unwind the power cord from the handle, and plug it into
a correct voltage, grounded outlet.
2. Position the machine so the plug and the power switch
are of easy access for the operator. Verify the fan vents
on the rear of the machine are not obstructed.
3. Lock the front wheels.
4. Toggle the power switch on the control panel to turn the
machine ON.
The machine launches into the initial Setup mode.
Loading ...
Loading ...
Loading ...