Loading ...
Loading ...
Loading ...
SECTION2: CONTENTSOFHARDWAREPACK(BoxedUnit)
Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in
parentheses. (Hardware pack may contain extra items which are not used on your unit.)
__ ATTACHING THE HANDLES
Hex Bolts
5/16-18 x 2"
(710-04039)
Handle Tabs
(784-5599)
©
Carriage Bolts
5/16-18 x 1-1/2"
(710-0262)
Hex Bolts
5/16-18 x 3/4"
(710-3008)
LockWashers
5/16" I.D.
(736-0119)
Cupped Washers
5/16" I.D.
(736-0242)
Hex Nuts
5/16"Thread @ @ @ @
(712-3068)
- TTACHING THE SHIFT ROD
AND CLUTCH CABLES
Flat Washers
5/16" I.D. x 5/8" O.D.
(736-0275)
Ferrule
(711-0677)
Hair Pin Clips
(714-0104)
C ATTACHING THE CHUTE ASSEMBLY
Hex Bolts
(710-3015)
1/4-20 x 3/4"
©©
©©
Chute Flange Keepers @ @
(731-0851A) Hex Lock Nuts
1/4-20Thread
(712-3027)
O TTACHING THE CHUTE DIRECTIONAL
CONTROL
Flat Washer
3/8" I.D. x 5/8" O.D.
(736-0185)
Hex Nut
@ @ 5/16"Thread
(712-3010)
_ air Pin Clip
(714-0104)
Cupped Washer
5/16" I.D.
(736-0242)
AUGER SHEAR BOLTS*
Shear Bolts
(710-0890A)
Hex Lock Nuts
@ @ 5/16" Thread
(712-0429)
F "Z" FITTING NUTS
Jam Nuts
#10-24 Thread @ @
(712-0121)
The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign object
or an ice jam, the snow thrower is designed so that the bolts may shear. These two spare shear bolts and nuts
are provided for your convenience.
IMPORTANT:NEVER replace the auger shear bolts with standard hex bolts. Any damage to the auger gearbox
or other components as a result of doing so will NOT be covered by your snow thrower's warranty.
Loading ...
Loading ...
Loading ...