AC 120V~60Hz 500W
CONTENTS
IMPORTANT SAFEGUARDS.....................................................01
OVERVIEW................................................................................03
DESCRIPTION OF CONTROLS................................................04
OPERATION..............................................................................06
CLEANING AND MAINTENANCE..............................................07
TROUBLESHOOTING ..............................................................08
TECHNICAL DATA.....................................................................08
1
IMPORTANT SAFEGUARDS
► This device is only intended for use in households in enclosed
spaces for making milk foam and heating milk. Dangers can
emanate from the device if it is used for an unintended use and/or
a different kind of use.
► Examine the device for any visible external damages prior to
using it. Never put a damaged device into operation.
► If the connection lead is damaged, you will need to have a new
connection lead installed by an authorized electrician.
► This appliance can be used by children aged 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
► Children shall not play with the appliance.
► Cleaning and user maintenance shall not be made by children
without supervision.
► Keep the appliance and its cord out of reach of children less
than 8 years.
► Do not leave the device unsupervised when it is in operation.
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs that may be needed.
Improperly performed repairs can cause considerable dangers for
the user.
► Only customer service departments authorized by the
manufacturer may carry out repairs on the device during the
guarantee period, as otherwise the guarantee entitlements will be
null and void in the event of any subsequent damages.
2
► Defective components must always be replaced with original
replacement parts. Only such parts will guarantee that the safety
requirements are fulfilled.
► Packaging materials may not be used for playing. There is a
danger of suffocation.
Danger of burns!
The heated milk in the milk frother and the interior of the jug can
get very hot.
Observe the following safety instructions and be careful not to
burn or scald yourself or others:
► When the milk is heated, the interior of the jug gets very hot!
► Always check the temperature of the milk, before drinking it.
► When you are heating the milk, keep the lid closed.
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or
Sub assemblies!
Observe the following safety notices to avoid dangers due to
electrical power:
► If the connection lead is damaged, you will need to have a
special connection lead installed by an authorized electrician.
► Do not operate this device if its power cable or plug is
damaged, if it does not work properly or if it is damaged or has
been dropped. If the power cable is damaged, it will need to be
replaced by the manufacturer or his service agency or a similar
qualified person, to avoid any dangers.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
3
structure is altered. In addition, functional faults on the device can
also occur.
OVERVIEW
①Transparent lid
②Stainless Steel Milk Jug
③Power Base
④Function Chromed Knob
⑤Start/Stop Button
⑥Handle
⑦Frothing Whisk Holder
⑧Frothing Whisk
⑨Chocolate Cover
4
DESCRIPTION OF CONTROLS
Liquid level indications
The appliance has got three markings for the filling:
MIN: Fill milk at least up to that marking
MAX (bottom): Fill milk up to that maximum marking to make milk
froth.
MAX (top): When you want to heat milk but not froth it, you can fill
milk up to that maximum marking (including the amount of
chocolate or tea).
Please note the maximum markings. Please use for milk froth
only the bottom MAX marking. Otherwise so much foam will be
made that the lid would lift and milk would overflow.
5
Instrucon of 6 funcons
Whisk Needed Icon Funcon Capacity Temperature
Hot thick
milk foam
300ml
Hot thin
milk foam
300ml
Cold milk
foam
300ml /
Warm milk 600ml
Hot
chocolate
600ml
Hot milk
tea
600ml
55-73℃/
131-163.4℉
55-73℃/
131-163.4℉
40-58℃/
104-136.4℉
70-88℃/
158-190.4℉
80-98℃/
176-208.4℉
6
OPERATION
l Please put the corresponding whisk onto the jug.
l Plug in the appliance.
l Turn the knob to the function you want. Press the
START/STOP push-dial in the middle of the knob, the buzzer
beep once with the blue indicator light, the motor and heater
will start to work. It is possible to stop the cycle before the
time set by pressing the START/STOP button.
l After connecting the power, the buzzer will sound one time
with white LED light. It will be ended if there is no operation
after 5 mins, the instruction light flashing 3 seconds with 3
beeps, then the light off.
l The LED light will turn into blue from white, stop working and
a beep when you switch the mode during working.
Warning: Do not use the appliance without liquids.
Note:
1.It is normal to have slight smoke when using the product for the
first time.
2.The result of the froth function can be influenced by the
ingredients used.
Caution: Keep the bottom of the cup and the base dry and free of
water or moisture before use.
Use whole milk for best results, removing it from the fridge
immediately before pouring it into the jug.
7
CLEANING AND MAINTENANCE
Please observe the safety instructions, before cleaning your
device:
► Before cleaning switch off the unit and take the power plug out
of the outlet.
► Clean the unit with a soft cloth.
► Do not clean the base or the power cord with water and
do not immerse them
.
► Clean the device again thoroughly when the machine hasn't
been used for a long time.
► Cleaning and user maintenance shall not be made by children
without supervision.
Cleaning
• Take off the lid. You can remove the magnetic whisk directly
from the jug.
• Clean the lid and the whisk as well as the jug of the milk frother
with diluted detergent, with warm water and a soft sponge or a
cloth.
• Do not use any hard or sharp-edged objects or abrasive
cleaning agents to clean the jug because the coating could by
damaged.
• Clean the lid and the whisk with lukewarm water. Rinse out the
interior of the jug with lukewarm water.
• Clean the outside of the appliance with a damp cloth.
• Never immerse the appliance in water or other liquids.
•The milk jug, lid, and all the attachments (chocolate cover and
frothing whisk) can be washed in the dishwasher.
8
TROUBLESHOOTING
Problem Cause Solution
The
appliance
doesn't work.
Mains plug is not
connected correctly
Please check that the mains
plug of the appliance is
connected correctly
Electronic defect. Please contact customer
support.
Milk is not
foaming.
Milk is warm or too hot to
foam.
1.Do not use fresh milk,
low-fat milk and skimmed
milk, Whole milk has better
milk froth and lasts longer.
2.Do not re-foam already
heated milk.
3.Try reducing the quantity of
milk in the milk jug.
TECHNICAL DATA
Item Milk Frother
Model MF-2050
Voltage AC 120V, 60Hz
Power 500W
Capacity frothing Min: 125 ml, Max: 300 ml
Capacity warming Min: 125 ml, Max: 600 ml
