Loading ...
Loading ...
Loading ...
7
Starting TV
Turning on the TV
You can simply operate the TV functions, using the button.
Power On (Press)
Power Off
1)
(Press and Hold)
Menu Control (Press
2)
)
Menu Selection (Press and Hold
3)
)
1) All running apps will close, and any recording in progress will stop.
(Depending on country)
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.
Note
• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
• The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
Using Line View Mode
• You can check the time and weather information or play music without
watching TV.
• You can switch to Full View mode or Line View mode by pressing the
button on the remote control.
• In Line View mode, press the
button to switch to Full View mode.
• To completely shut down the TV, press the
button on the remote
control or press and hold the power button on the back of the product.
Setting the Motion Sensor Time
• The motion sensor works only in Line View mode.
• If no motion is detected around the TV for a set period of time, the screen
will turn off automatically.
- If no motion is detected for more than a set period of time, the screen
will turn off.
- To set the power-off time, press the
button on the remote control,
and then select the set time in → [General] → [System] →
[Additional Settings] → [Screen Off].
- If motion is detected even after the screen is turned off, the screen
will turn on.
- If no motion is detected for more than four hours, the TV will turn off
automatically. After that, even if motion is detected, it will not turn
on automatically.
Setting the Motion Sensor Sensitivity
Sets the sensitivity of the motion sensor function.
• Press the
button on the remote control and refer to →
[General] → [System] → [Additional Settings] → [Motion Sensor
Sensitivity].
Note
• The motion sensor is located at the bottom of the TV screen. Do not
cover the front of the sensor with objects, etc. Doing so may affect the
motion sensor.
• Sensor performance may vary depending on the TV installation and
operating environment.
- Screen brightness and colour tone may be affected by the colour of the
floor on which the TV is placed.
- In a special light source environment other than standard light sources
(Halogen, Fluorescent), there may be deviations in sensor recognition,
depending on the location, type, and number of light sources.
- If the surroundings of the TV are too dark or too bright, the screen
brightness may be limited or the sensor may not operate properly.
- The sensor can detect motion by blinking LEDs, pet dogs, or cars
moving outside the window.
• After pressing the
button on the remote control, follow →
[General] → [System] → [Additional Settings] → [Screen Off] to turn
off the screen and power if there is no user motion in Line View mode.
Loading ...
Loading ...
Loading ...