Loading ...
Loading ...
Loading ...
• This equipment should be installed and operated with a minimum
distance of 20 cm between the radiator and your body.
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the appliance because it is
heavy. Always wear safety gloves.
• When tilting the appliance, make sure the door does not touch
the floor. The door glass pane is sensitive, especially to any lateral
impact (i.e. impact from the side, on the edge of the door).
• Make sure the air can circulate around the appliance.
• After you place the appliance, wait at least 4 hours before
connecting the appliance to the power supply. This is to allow the
oil to flow back in the compressor.
• Do not install the appliance close to radiators or cookers, oven
or hobs.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too
cold, such as the construction appendices, garages or cellars.
• When you move the appliance, lift it by the front edge to avoid
scratching the floor.
• Never move or lift the appliance by applying force on the door
handle.
7
Safety instructions
Loading ...
Loading ...
Loading ...