Loading ...
Loading ...
Loading ...
• To allow for adequate ventilation and cooling of the appliance, there has to be sufficient clearence
behind the appliance and on both sides as well (at least 1 15/16" (50 mm)). Please, also observe
the clearance required to fully open the door in order to allow pulling out the drawers and shelves
(see installation diagram).
• In cases of installation where there is less than 1 15/16" (50 mm) of space around the cabinet,
a recess must be made at the ventilation grilles on both sides of the appliance (ventilation grilles
must not be blocked) which must be able to supply or exhaust air on each side through an
opening of at least 31"
2
(200 cm
2
).
• Furthermore, 1 15/16" (50 mm) distance from the rear wall must always be maintained and must
be connected to an opening above or behind the cabinet.
• The appliance comes supplied with two
spacers that should be fitted in the slots
on the back of the appliance, one on either
side, near the bottom. The spacers ensure
adequate air circulation that is required for
correct appliance operation. The appliance
will operate normally without the spacers
in place; however, this could affect its
power consumption.
14
Installation and connection
Loading ...
Loading ...
Loading ...