Loading ...
Loading ...
Loading ...
USA-CAN - 27
Half Load Option
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as you
like.
2. Turn the machine on with On/Off key.
3. Select the desired program and press the
Half Load key. The Half Load indicator
will light on the display.
4. Press Start/Pause key to start the
selected program and close the door of the
machine.
5. With the Half Load function you can save
power while using the lower and/or upper
baskets of the machine.
8.5. Programming The Washing Time
Delay Timer
If an economical electricity tariff is applied
in your region, you can use the Delay
Timer function to wash your dishes during
appropriate hours. You can delay the start
of the selected program until 19 hours.
Delay Timer cannot be set after the
program starts.
1. Press the Delay Timer function key after
selecting the washing program and other
auxiliary functions.
2. Once you press the Delay Timer key,
Display will show “1h” and Display will show
program number, program duration and
delay time alternately for 2 seconds.
3. Set the desired time by pressing the
Delay Timer key. Time will increase with the
increments of 1 hour every time you press
the key.
4. In order to start the selected program
with delay, Start/Pause key should
be pressed and the door of the dishwasher
must be closed within 4 seconds.
NOTE: The use of Delay Timer has a
special case.
a. Assume that you have selected a
program with delay and pressed Start/
Pause key. After a length of time, you have
opened the door of the machine. If the door
of the machine is closed within 4 seconds,
the machine resumes on for the duration of
delay timer automatically. If the door of the
machine is not closed within 4 seconds the
delay timer will be paused. To resume the
delay timer you should open the door again
and press Start/ Pause key and close the
door within 4 seconds.
Changing the settings while Delay Timer
is enabled
While the Delay Timer function is activated,
you cannot make changes in the washing
program, auxiliary functions or the duration
of delay time.
i. Program and auxiliary functions cannot be
set/changed after the program has started.
To cancel the Delay Timer function
1. Open the door of the dishwasher
2. Press and hold program
Delay Timer key for 3 seconds
3. At the end of 3 seconds delaying process
will be cancelled.
i. You can select and start a new program
following the cancellation of Delay Timer
function.
ii. Delay Timer function can not be set after
the program starts.
8.6.Starting The Program
First of all, open the door of your machine
and in order to start your machine after
selecting the program and auxiliary
functions, Start/Pause + On/Off key. Once
the program starts, the estimated time
remained to the end of the program will
appear on the display.
i. Your machine performs water softening
depends on model hardness level of
the supply water (Model depending).
Remaining time displayed towards the end
in some programs can be different from the
time indicated at the beginning due to this
process. The total time can also change
while the program is running depending
on the ambient temperature where your
machine is installed, temperature of the
supply water and amount of the dishes.
ii. Pay attention not to open the door of
the machine when it is running. Stop the
Loading ...
Loading ...
Loading ...